MANURE CONTROL
TECHNICAN
’S MANUAL V0.
3
2020-02-19
30
9.3.2
Output
The
Output
parameter is depending on motor type (
See Section 9.3.1
)
9.3.2.1
Alternative Mode
If the
Alternative Mode
is enabled, the system alternates between the
two programmed output on an equipment start command.
9.3.2.2
Contactor and External VFD mode
Those parameters are true only if the motor type is set to
Contactor
or
External VFD.
Standard:
Address:
PLC digital output address (
See
Section 5
) to activate equipment. Enter
address in
Output 2
if the alternative
mode is activated.
Node:
Communication address for smart
overload. Enter address in
Output 2:
Node
if the alternative mode is activated.
Alternative:
9.3.2.3
VFD and Softstart
Those parameters are true only if the motor type is set to
VFD
or
Softstart.
Standard:
Address:
Last 3 digit of the assign IP
address (
192.168.10.xxx).
Output 1 Contactor:
PLC digital output
address (
See Section 5
) to activate motor
1.
Output 2 Contactor:
PLC digital output
address (
See Section 5
) to activate motor
Alternative:
2.
