VALLOX 130 E
130 E location
VALLOX 130 E is mounted in a place
where temperature is not less than
+10
°
C. Without protective casing,
the unit has to be located in a place
with no acoustic disturbance: store-
rooms, technical rooms etc.
VALLOX 130 E can also be located
in a damp room.
Fixing
VALLOX 130 E is mounted on the
wall with a fixing plate as shown in
the adjacent figure. When needed,
you can use a lock mounting at the
lower part of the unit.
DURING MOUNTING THE UNIT RISES 10
MM HIGHER THAN THE FINAL HEIGHT.
VALLOX 130 E UPPER EDGE
LOWER EDGE
OF BRACKET
Electric wires can be taken out from
the corners or from the middle
* AREA WHERE THE ELECTRIC WIRE AND
CONDENSING W
ATER PIPE CAN BE ENTERED TO THE W
ALL
LOWER EDGE
OF BRACKET
© VALLOX • We reserve the right to make changes without prior notification.
LOCATION AND MOUNTING
14
ELECTRICAL CONNECTION
CONDENSING WATER
CONNECTION AND WATER SEAL
LOCK MOUNTING
