5
© Vallox Oy - All rights reserved
INTRODUCTION
IMPORTANT
Apartment-specific
ventilation units allows
residents to adjust the
ventilation efficiency.
Ventilation is controlled
based on the need e.g.
through the cooker
hood, ventilation
control panel, or a
separate control centre.
In order to ensure that
the indoor air presents
no harm to health and
remains optimal also
for the structures of the
building,
ventilation
must be kept on
without disruptions.
It is recommended
that ventilation be
left turned on during
long holidays also.
This keeps the
indoor air fresh and
prevents humidity
from condensing in
the ventilation ducts
and structures. It also
reduces the risk of
moisture damage.
NOTE
For the MyVallox Cloud/
Home instructions,
please go to
vallox.techmanuals.info/
ValloxMV/ENG/help/
webhelp
IMPORTANT
Prolonged overpressure
can result in damage
to the structures of the
building.
VENTILATION UNIT CONTROL
Ventilation unit control options
Operation of the Vallox ventilation unit can be controlled by the following
means:
• Through a MyVallox control panel installed in the building.
• Through the MyVallox Home local area network connection and the
MyVallox Home/Cloud user interface.
• Through the MyVallox Cloud service and the MyVallox Home/Cloud
user interface.
• Through a remote monitoring service or building automation that
uses voltage signals or Modbus messages.
In addition to the integrated humidity and carbon dioxide sensor,
ventilation can also be adjusted automatically by using the optional
carbon dioxide, humidity, or VOC (air quality) sensor. When these are
used, ventilation remains optimal even when the dwelling is unoccupied.
Each user can use the week clock to adjust the ventilation to fit their
individual lifestyle.
The ventilation unit’s integrated humidity and carbon dioxide sensors
adjust ventilation automatically according to the need. In addition,
ventilation can be automated by using optional carbon dioxide, humidity
or air quality (VOC) sensors.
Filter reminder
The unit reminds of the need to change filters in the popup window of
the compatible MyVallox control panel, in the MyVallox Home/Cloud user
interface and by changing the relay status, provided that a signal light
has been connected to the relay connectors and Maintenance reminder
has been chosen as the relay setting.
The filter reminder can be acknowledged by the following means:
• from the MyVallox control panel
• from the MyVallox Home/Cloud user interface
• with the Vallox Delico PTD EC and Vallox Capto PTC EC cooker
hoods
— Push
the damper position
button four times at less than
one second intervals, starting from the Damper closed position.
Ventilation unit setup without a control panel
The ventilation unit setup can also be completed without a control panel.
For instructions, please go to
https://vallox.techmanuals.info/ValloxMV/ENG/help/webhelp
See instructions provided in the section Connecting the ventilation unit
to the computer.
Connecting the ventilation unit to the cloud service
The ventilation unit can be connected to the MyVallox Cloud service. The
cloud service allows for controlling ventilation remotely also, using e.g.
a smartphone or tablet. Also the unit software is updated automatically
through the cloud service. To connect to the cloud service, the
ventilation unit must be connected to the Internet via LAN and registered
with the cloud service. At the same time you create a MyVallox Cloud
account for yourself. Read more about the service at www.myvallox.com.
