OVALE
VA3834
FREE-STANDING BASIN
INSTALLATION GUIDE
AFFORDABLE LUXURY
website:
www.valleyacrylic.com •
E-mail:
customer service call
Toll Free: 1.877.398.8827 •
Fax:
+1.604.820.0124
STEP 1: PREPARING THE DRAIN
- Unscrew the tube (2) and remove the hexagonal nut (3), the
white nylon washer (4) and the black rubber washer (5).
- Insert the body of the drain (1) into the hole of the sink.
STEP 2: INSTALLING THE DRAIN
- Apply a thin layer of teflon on the threads of the pipe (2) and
screw the pipe to the drain base (1). Assemble the drain to the
hole of the sink using the clamping ring kit (3).
- It is advisable to insert the P-TRAP on the hose along the drain
assembly. Then adjust the height of the outlet pipe of the P-TRAP
along the height of the plumbing wall.
- Position the sink to the wall at a distance sufficient to allow
assembly of the P-TRAP plumbing.
STEP 3: INSTALLING THE BASIN
- Well clean the sink and work area in order to remove residual
dirt and dust.
- Seal the edge of the sink with a clear sillicone. Allow to harden
the sillicone for 24 hours before use.
- To close the drain, press on the cap until it clicks.
- To open the drain, press and release the cap.
1
1
2
3
5
4
3
2
