10
the tube snap into place. Check to make sure both ends of the tube are secured
before releasing the bulb. Repeat process for second bulb.
25.
Apply power to the table. Both bulbs should light up immediately. If either or
both bulbs to not illuminate, check to make sure they have a good connection to the
sockets as described in the previous step.
26.
If the bulbs still fail to illuminate, inspect the bulb mounting brackets to ensure
they line up flush and square to the bulbs. If not, UNPLUG THE TABLE and then
loosen the screws on the problem bracket for repositioning. Repeat as needed for
other brackets.
27.
Once the lamps are operational, slide the light diffuser back into place.
28.
On the left end of the overhead housing, reinstall one diffuser trim bracket (lip
facing up) and secure it to the housing with two of the 8 – 32 x 5/8” black oxide pan
head Phillips self-tapping screws. Repeat for the other side.
Overhead installation should now be complete.
Содержание Dynamo Hockey
Страница 1: ......