Order replacement parts at www.valleydynamoparts.com
© 2020 Valley-Dynamo
1.
Remove all parts and accessories from parts box and check against the enclosed list.
2.
Have 2 (or more) people carefully turn the table upside down, taking care not to
scratch the Corner Castings (assemble on carpet or cardboard)
3.
Remove the
⅜
” Carriage bolts that secure the legs during shipment and re
-position
the legs between the ribs. Secure the legs using the hardware as shown in the
following illustration.
4.
Place four (4) Leg boots on the legs.
5.
Have 2 (or more) people carefully turn the table upright.
6.
Attach the score beads on each end of the table as shown, using (2) #8 x 1½
” screws.
7.
Attach the goal ends using (6) each #8 x
⅝
screws.
8.
Level the table by inserting the enclosed shims into the Leg Boots as required. If
additional shims are needed, pieces from the packing box can be used.
9.
Plug the table into an Electric Outlet.
EACH LEG USES 3 CARRIAGE BOLTS
Maintenance Procedure
Playfield Cleaning
–
With the blower running, clean by applying Rubbing
Alcohol to a clean cloth
(NEVER, EVER, EVER,
EVER
POUR THE RUBBING
ALCOHOL OR ANY LIQUID DIRECTLY ONTO THE TABLE; it will cause the
playfield to warp).
Puck and Mallet Service
–
Use the enclosed sandpaper to lightly sand the Puck
and Mallet faces until they slide smoothly on the playfield.
