Valiant geoTHERM VWS 36/4.1, Инструкция по установке и обслуживанию

Страница: 42 / 64

Appendix
42
Installation and maintenance instructions geoTHERM 0020250181_00
I Technical data
Technical data
–
General
VWS 36/4.1 230V
Flow/return heating connections, boiler side
22 mm diameter
Boiler-side flow/return heat source connections 22 mm diameter
Product dimensions, width 440 mm
Product dimensions, height 720 mm
Product dimensions, depth 435 mm
Weight without packaging 59 kg
Weight with packaging 67 kg
Weight when ready for operation 66 kg
Heating circuit/compressor rated voltage 1/N/PE 230 V / 50 Hz
Control circuit rated voltage
1/N/PE 230 V / 50 Hz
Fuse type B, slow-blow 16 A
Optional on-site residual-current circuit breaker RCB type A or RCB type B
In-rush current without in-rush current limiter 23 A
Min. electrical power consumption for B
−
10/W20 0.6 kW
Max. electrical power consumption for B20/W55 1 kW
Max. electrical power consumption in continuous operation 4.7 A
IP rating in accordance with EN 60529 IP 20
Inner sound power level (LWi) in accordance with EN 12102; heating mode at B0/W35 41.1 dB(A)
Inner sound power level (LWi) in accordance with EN 12102; heating mode at B0/W45
43.6 dB(A)
Inner sound power level (LWi) in accordance with EN 12102; heating mode at B0/W55
44.7 dB(A)
Permissible ambient temperature 7 … 40
℃
Installation room at a refrigerant volume of 0.70 kg 1.6 m
³
Installation site Interior/dry
Technical data
–
Source circuit
VWS 36/4.1 230V
Min. brine fluid operating pressure 0.05 MPa
(0.50 bar)
Max. brine fluid operating pressure 0.3 MPa
(3.0 bar)
Nominal volume flow
Δ
T 3 K for B0/W35 600 l/h
Min. source inlet temperature (hot brine) in heating mode
−
10
℃
Max. source inlet temperature (hot brine) in heating mode
20
℃
Brine content of the brine circuit in the heat pump
3.5 l
Remaining feed head at max.
Δ
T 3 K B0/W35 590 mbar
Electrical power consumption of the brine pump at B0/W35
Δ
T 3 K with an external
pressure loss of 250 mbar in the source circuit
21 W
Electrical power consumption of the brine pump 3 … 70 W
Pump type High-efficiency pump
Materials
–
Cu
–
CuZn alloy
–
Stainless steel
–
EPDM
–
Brass
–
Fe
Brine fluid type
Ethylene glycol 30% vol.