Valex SV4000, Руководство по эксплуатации и обслуживанию

Страница: 13 / 20

13
11) DO NOT DISASSEMBLE THE MACHINE
Do not disassemble the machine for any reason. Do not use the machine without the
guards installed.
12) DO NOT TAMPER WITH ANY OF THE MACHINE’S COMPONENTS
Do not tamper, modify or remove any component from the machine.
13) VERIFY THE SOLIDITY OF THE MACHINE
Periodically check screw and blade tightness.
14) USE THE MACHINE IN A WELL-VENTILATED ROOM
The machine must be used in a well-ventilated area in order to ensure sufficient
cooling and air circulation.
15) DO NOT USE THE MACHINE IN DANGEROUS ENVIRONMENTS
Do not use the machine in areas with a risk of explosion and/or fire, in poorly ventilated
spaces or in the presence of inflammable and/or explosive materials, dampness,
gases, vapours, and acids.
16) MOVING OF THE MACHINE
The machine should be moved with caution. Hold it with two hands under the base
to move. Do not attempt to move the machine by pulling on the power cord or other
machine parts.
17) POSITIONING OF THE MACHINE
Use the nuts and bolts to position and secure the machine on the work bench or stand
with a flat, solid and non-flammable surface that must support the total machine weight
and vibrations caused by use. Using the machine without securing it and on flammable
surfaces such as wood, plastic, etc. is prohibited. Periodically check fastenings.
18) WORK WITH ADEQUATE LIGHTING
Only work when there is sufficient daylight or suitable artificial lighting.
19) DO NOT EXPOSE THE MACHINE TO THE ATMOSPHERIC AGENTS
Do not expose the machine to the elements such as rain, fog, sun, high and low
temperatures.
20) DO NOT TOUCH THE MACHINE IF YOU ARE WET
Never use this machine when your feet are bare or wet. Do not touch the machine
when your hands are wet.
21) CHECK BEFORE STARTING UP THE MACHINE
Before plugging the machine in, make sure the switch is OFF “O” (switched off) and
that the service keys are removed. Do not use the machine if the surface insert is
worn and the guard broken.
22) CORRECT ASSEMBLY CHECKS
Do not use the machine if the sawdust vacuum tube (not supplied) is disconnected
and the vacuum (not supplied) is off.
23) FUNCTIONAL CHECKS
Make sure the blade guard is not damaged. The blade guard should rest against the
piece and fully cover the cutting area.
24) ACCURATELY POSITION THE WORK PIECE
For your safety, it is important that the work piece is well-rested on the work surface.
The piece must have at least one flat side like tables, panels, etc.; do not cut bran-
ches, tree trunks or circular sections. Do not cut pieces that contain nails or screws
or wrapped in tape, cord or other. Do not cut pieces on a slant. Rest them on the
work surface.
25) PROHIBITED MATERIALS
Cutting metal, plastic, fabric, flammable materials and materials that generate harmful
or toxic dust and vapours is prohibited.
26) PREVENT POSSIBLE ACCIDENTS
Always test operations without a work piece before beginning work; in this phase,
make sure no one nears the machine and keep safety distances. Always use personal
safety devices. When the machine is running, do not touch the blade. Serious injury
hazard! After replacing components, always run a general check before starting work.
Do not access internal machine parts.
27) ONLY USE BLADES SUITED FOR THIS MACHINE
This machine was designed to use specific blades to cut wood; using blades suited
for other materials is prohibited. Use blades which conform to the regulations in force
in the country of use.
28) HANDLE THE BLADE WITH CAUTION
The blade has very sharp parts: Handle it with caution and always wear protective
gloves. Serious injury hazard!
29) ONLY USE BLADES IN PERFECT WORKING CONDITIONS
Do not use damaged or deformed blades; if worn, replace with new blades.
30) DO NOT FORCE THE BLADE
Do not subject the blade to: Collision, bending, excessive pressure, heat, irregular
speed changes, vibrations. In these conditions, the tool has a limited working life and
may break without warning with the risk of flying fragments.
31) DO NOT TOUCH PARTS IN MOTION WHILE THE MACHINE IS RUNNING
WARNING! Serious injury hazard! Do not touch the blade or any part in motion
while the machine is running. Be careful as how you move your arms and hands.
Only remove the work piece after turning off and unplugging the machine.
32) MACHINE MALFUNCTION
Turn the switch to OFF “O” (switched off), disconnect the power supply to the machine
by removing the plug from the socket when: Not in use, left unattended, moved, the
power cord is damaged, rested or when removing the work piece, during adjustments,
maintenance and cleaning.
33) WAIT FOR THE MACHINE TO STOP COMPLETELY
The engine, the moving parts and the blade continue to run for a short while after the
machine is switched off. During this time, these parts must not be touched. Serious
injury hazard!
34) DO NOT LEAVE THE MACHINE UNATTENDED WHILE RUNNING
Do not leave the machine unattended while running and wait until all moving parts
fully stop before leaving the machine after turning it off.
35) KEEP THE WORKPLACE CLEAN AND TIDY
Mess and dirt are sources of danger. Make sure there are no tools or objects around the
machine that could be damaged. Do not place tools or objects on the machine that could
accidentally fall. Frequently eliminate cutting residue from the machine and floor.
36) HARMFUL DUST
WARNING! The dust produced by some types of wood is very harmful to
your health. Wear appropriate masks, extract the saw dust from the machine and
equip the room with an extractor for air exchange.
37) REPAIRS MUST BE CARRIED OUT BY AUTHORISED PERSONNEL
Do not attempt to repair this machine or to gain access to its internal parts. Always
contact an authorised assistance centre. Interventions by unauthorized personnel will
cause the warranty to be annulled and could create a dangerous situation. Keep proof
of purchase for warranty service.
38) REQUEST AND HAVE ORIGINAL SPARE PARTS ONLY INSTALLED
Request and use only original spare parts. Please contact your dealer. The use of
non-original spare parts will cause the warranty to be annulled and could create a
dangerous situation.
39) STORE THE MACHINE IN A SAFE PLACE
When not in use, keep the machine in a dry place out of reach of children.
40) RESIDUAL RISKS
WARNING! Strict observance of the instructions with the use of individual
means of protection minimalizes risks of accidents but does not completely rule
them out.
41) ALWAYS FOLLOW THESE INSTRUCTIONS
Only use this machine as described in these instructions. Do not use it for purposes
for which it was not intended.
ELECTRICAL SAFETY REGULATIONS
1) DO NOT TOUCH ELECTRICALLY-POWERED PARTS
WARNING! Risk of electric shocks. Some parts of the machine are electri-
cally-powered.
2) KEEP CHILDREN AND ANIMALS AWAY FROM THE ELECTRICAL DEVICES
Keep children and animals away from the devices connected to the power supply.
3) CHECK THE POWER SUPPLY VOLTAGE
The power supply voltage must correspond to that indicated on the technical data
plate. Do not use any other type of power supply.
4) USE A TRIP SWITCH
It is advisable to fit a trip switch on the power supply line that trips at the levels laid
down in standards currently in force in the Country in which the machine is used.
Contact your local electrician.
5) CONNECTION TO THE POWER SUPPLY
Before connecting or disconnecting the machine to or from the power supply, make
sure that the switch is in the OFF “O” (switched off) position.
6) DO NOT TAMPER WITH THE POWER CORD
Do not tamper with the power cord. Do not replace the power cord; only use a socket
suited for the machine plug. Only use the power cord as intended.
7) CHECK THE POWER CORD
The power cord and extension cable (where applicable) must be checked periodically
and must be checked for signs of damage and wear every time they are used. If it
is not found to be in good condition disconnect it immediately and do not use the
machine until an authorized assistance centre has repaired it.
8) KEEP THE POWER CORD IN A SAFE POSITION
Keep the power cord and extension cable (where applicable) away from the working
area, damp, wet or oily surfaces, or surfaces with sharp edges, heat sources, fuel
and transit areas for vehicles or pedestrians.
9) DO NOT STEP ON OR FLATTEN THE POWER CORD
Never step on the power cord. Be aware of its position at all times.
10) DO NOT USE THE MACHINE IN THE PRESENCE OF LIQUIDS
Do not wet it with liquids and do not expose it to damp environments. Do not leave
it outdoors.
11) USE AN EXTENSION CABLE SUITABLE FOR THE MACHINE
Only use an extension cable that is suitable for the power of the machine you are using
and dimensioned according to its length; consult your local electrician.
12) DISCONNECT THE MACHINE BY PULLING THE PLUG ONLY
To remove the plug from the socket, pull on the plug only and not the power cord!
13) AVOID TOUCHING SURFACES THAT ARE EARTHED
Avoid body contact with earthed surfaces such as refrigerators, radiators, pipes and
metallic fixtures, etc. Using a platform to electrically insulate the user from the floor
is recommended.
TRANSPORT AND LIFTING (FIG. A)
WARNING! The Manufacturer is not liable for any direct and/or indirect damage
caused by incorrect transport or lifting.
The machine must be transported and lifted with caution to avoid accidents and
damages.
Lift the machine with extreme caution, holding it with both hands under the base and
moving it slowly, without jerky or sudden movements.
Do not attempt to move the machine by pulling on the power cord or other machine
parts.
STARTING UP (FIG. A)
WARNING! The Manufacturer is not liable for any direct and/or indirect damage
caused by incorrect installation or connections.
WARNING! Before carrying out the following operations, make sure that the