- 14 -
g
!
!
IMPORTANT! The jigsaw is suitable for
cutting, by means of a specific blade, panels
of wood or plastic material and sheet metal
with a low carbon content. Any other use is
prohibited.
These instructions contain information deemed
necessary for proper use, knowledge and
standard tool maintenance. They do not report
information on techniques for working with
various materials. The user will find more infor-
mation in books and specialised publications or
by attending courses.
SYMBOLS
Carefully observe the symbols in fig.B and
memorise their respective meanings. Correct
interpretation of the symbols allows a safer use
of the machine.
1 Technical data
2 Double electric insulation
3 Electric and electronic waste may contain
potentially hazardous substances for the
environment and human health. It should
therefore not be disposed of with dome-
stic waste, but by means of differentiated
collection at specific centres or returned to
the vendor in the event of purchasing a new
identical power tool. The illegal disposal of
waste will result in administrative sanctions
4 Certifications
V Volt
Hz Hertz
~
alternating current
W Watt
kg kilograms
mm millimetres
s seconds
n
0
no-load speed
min
-1
strokes per minute
dB decibel
COMPONENTS
Refer to fig. A and the following figures, attached
to these instructions.
1. On/Off switch with speed regulator
3. Hand grip
4. Lock-on button
5. Adjustable base plate
6. Blade
7. Blade chuck
8. Guard
9. Disc blade guide
10. Screws and base lock plate
11. Engine air vents
12. Dust extraction adaptor
13. Power supply plug and cable
14. Key
15. Pendulum action lever
16. Parallel guide
17. Screws and parallel guide locking knob
18. Locking clamp for quick blade attachment
19. Parallel cut guide
INSTALLATION
!
!
IMPORTANT! The manufacturer is not
liable for any direct and/or indirect damage
caused by incorrect connections.
!
!
IMPORTANT! Before you perform the
following steps, make sure that the plug is
disconnected from the AC power supply.
!
!
IMPORTANT! Wear protective gloves.
TRANSPORT
Always remove the blade and use the packaging
or case (where provided) when transporting the
tool; this will protect it from impact, dust and hu-
midity which can compromise normal operation.
HANDLING
Firmly grasp the hand grip without using the
switch; keep the tool well away from your body
and after use place it down gently.
SWITCHING ON
When choosing where to use the power tool, the
following should be considered:
- that the place is not damp and is protected
from the weather.
- that there is a large operational area free from
obstructions.
- that there is good lighting.
- that it needs to be used close to the general
