MAINTENANCE
!
WARNING! Before any checks, unplug the battery charger
from the mains, and take out the battery.
!
WARNING! Do not tamper with or attempt to repair the
battery charger or the battery.
The working life and costs also depend on constant and meti-
culous maintenance.
Take good care of your electrical device and clean it regularly. In
this way its efficiency will be ensured and its lifespan extended.
Additionally, check that there are no breaks or damaged parts.
- Remove dust with a cloth or a brush with soft bristles.
- Do not wet or spray water over the electrical device - risk of
internal infiltrations.
- Do not use any flammables, detergents or solvents. The plastic
parts can easily be damaged by chemical agents.
PROBLEMS, CAUSES AND SOLUTIONS
PROBLEM
CAUSES
SOLUTIONS
The battery
d o e s n o t
charge
Power plug not
inser ted cor-
rectly into the
battery.
Remove and rein-
sert the power plug
into the battery.
Battery charger
or battery not
ready for char-
ging.
B a t t e r y i s
overheated.
Wait for the battery
to cool down
Battery charger
or battery faulty.
Replace the battery
and/or contact an
authorised service
centre.
!
WARNING! If the power tool still fails to operate correctly
after you have carried out the above operations, or in the
event of anomalies other than those described above, take it
to an authorised service centre with proof of purchase and
ask for original spare parts. Always refer to the information
shown on the technical data label.
STORAGE
Clean the machine and all its accessories thoroughly (see Maintenance
section). Protect the unpainted parts with protective oil and use the
original packaging or case (where fitted) to protect it.
Store the machine in a stable and safe position out of the reach of
children. The place must be dry, free from dust, temperate and protected
from direct sunlight.
Keep children and unauthorised personnel out of the storage room.
DISPOSAL
In order to protect the environment, proceed according to the
local laws in force. Contact the relevant authorities for more
information.
When the machine is no longer usable or repairable, take the
machine and its packaging to a recycling centre.
Electric and electronic waste may contain substances hazar-
dous to the environment and human health. It should therefore
not be disposed of with household waste, but by means of
separate collection at special collection centres or returned to
the vendor in the event of purchasing a new similar tool. Illegal
disposal of waste will result in administrative sanctions.
Battery disposal: The batteries included in the equipment can
be disposed of along with it.
Do not dispose of used batteries in fire and do not dispose
of them in the environment, but take them to special disposal
centres. Do not dispose of them with domestic waste.
WARRANTY
The product is protected by law against all non-conformities with
regard to its stated characteristics, provided that it has been used
solely in the way described in these user’s instructions, it has not
been tampered with in any way, it has been stored correctly, it
has been repaired by authorised personnel and, where necessary,
only original spare parts have been used.
In the event of industrial or professional use or similar, the warranty
is valid for 12 months.
To issue a request for intervention covered by warranty, proof
of purchase must be shown to the retailer or authorised service
centre.
AMENDMENTS
The text, figures and data correspond to the standards in place
on the date of printing the instructions contained herein. The
manufacturer reserves the right to update the documentation
if changes are made to the power tool, without being bound by
any obligations.
© No part of this publication and the documentation enclosed
with the machine may be reproduced without written permission
from the manufacturer.
DECLARATION OF CONFORMITY
The firm indicated on the label declares, under its own respon-
sibility, that the product cited there complies with the essential
health and safety requirements contained in the following
European directives:2014/35/CE, 2014/30/CE, 2011/65/CE
The person authorized to compile the technical file is in
Valex SpA - Via Lago Maggiore 24
36015 Schio (VI) - Italy
Schio, 10-2018
Attorney
SMIDERLE STEFANO
