Valex LI-LINE2V IMPACT 218, Руководство пользователя

Страница: 9 / 16

- 9 -
DISPOSAL
In order to protect the environment, proceed according to the local laws in force. Contact
the relevant authorities for more information.
When the machine is not longer useable or repairable, deliver the machine and packaging
to a recycling centre. Take out the batteries (where fitted) and dispose of them separately.
Electric and electronic waste may contain substances that are dangerous for the en-
vironment and for human health. For this reason they must never be disposed of together
with domestic waste, but collected separately in specific collection centres or returned
to the retailer when similar new equipment has been purchased. The illegal disposal of
such equipment may result in prosecution to the full extent of the law.
Battery disposal : The batteries included in the equipment can be disposed of along
with it.
Do not throw the used batteries on the fire and do not dispose of them in the environment,
but take them to special disposal centres. Do not dispose of them with domestic waste.
PROBLEMS, CAUSES AND SOLUTIONS
PROBLEM CAUSES SOLUTIONS
The electrical
tool fails to start
Battery empty Fully charge the battery
Battery not correctly inserted
in the tool housing
Take out the battery and insert it
correctly
Rotation direction switch in
central lock position
Move the switch to one of the two
positions R or L
The battery has overheated
and the internal auto reset
protection has cut in
Wait for the battery to cool down
Electrical tool or battery faulty Replace the battery and/or contact
an authorised service centre
T h e b a t t e r y
does not charge
Battery not correctly inserted
in the battery charger housing
Take out the battery and insert it
correctly
Battery charger not ready for
charging
Plug it into the electric power
supply.
Press the start charging button
(if fitted)
Battery charger or battery
faulty
Replace the battery and/or contact
an authorised service centre
The drill stops
while drilling
Battery empty If available insert a new charged
battery, or take out the battery and
fully charge it.
The battery has overheated
and the internal auto reset
protection has cut in
Wait for the battery to cool down
!
IMPORTANT! If the electrical tool still fails to operate correctly after you have carried
out the above operations, or in the event of anomalies other than those described
above, take it to an authorised service centre with proof of purchase and ask for
original spare parts. Always provide the information shown on the technical data label.
WARRANTY
The product is protected by law against non-compliance with the declared characteri-
stics provided it is used only in the manner described in the instructions, it has not been
tampered with in any way, it has been stored properly, has been repaired by authorized
and, where applicable, have been used only original spare parts.
In the case of industrial or professional use or when using such a guarantee is valid for
12 months.
To issue a claim under warranty you must present proof of purchase to your dealer or
authorized service center.