Page 5
Проверил: Р.Ч./24.03.2015г
d) Keep in mind that the operator or user is responsible for accidents or hazards occurring to other
people or their property.
e) If the supply cord is damaged, it must be replaced by the manufacture or its service agent or a
similarly qualified person in order to avoid a hazard.
f) This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliance by a person responsible for their
safety.
g) Children should be supervised to ensure that they do not play with the appliance.
SPECIFIC SAFETY RULES
1.
Before use check the supply and extension cord for signs of damage or aging. If the cord
becomes damaged during use, disconnect the cord from the supply immediately.
2.
DO NOT TOUCH THE CORD BEFORE DISCONNECTING THE SUPPLY. Do not use the
appliance if the cord is damaged or worm.
3.
Read the instruction carefully .Be familiar with the controls and proper use of the equipment.
4.
Keep extension cord away from cutting elements.
5.
Wear protective glasses and goggles.
6.
Never allow children or people unfamiliar with the instructions to use the machine.
7.
Stop using the machine while people, especially children, or pets are nearby.
8.
Only use the machine in daylight or good artificial light.
9.
Before using the machine and after any impact, check for signs of wear or damage and repair as
necessary.
10. Never operate the machine with damaged guards or without the guarding place
11. Keep hands and feet always from the cutting means at all times especially when switching on the
motor.
12. Take care, against injury from any device fitted for trimming the filament line length.
13. Never fit metal cutting elements;
14. Never use replacement parts or accessories not provided or recommended by the manufacturer.
15. Disconnect the machine from the mains before checking, cleaning or working on the machine and
when it is not in use.
16. Inspect and maintain the trimmer regularly. Have the trimmer repaired only by an authorized
repairer.
17. Take care against injury from the blade fitted for trimming the filament line length. After extending
new cutter line, always return the trimmer to its normal operating position before switching on.
18. Always ensure that ventilation openings are kept clear of debris.
19. When not in use, store the trimmer out of the reach of children.
