VALERII S&M GROUP 0503CD5014A-26, Оригинальное руководство пользователя

Страница: 2 / 8

Проверил: Р.Ч./24.03.2015г
SAFETY INSTRUCTIONS FOR CHARGER AND BATTERY
Read the general instructions and safety instructions carefully before charging the battery.
Only use the prescnbed charger to load the battery. Do not charge ballenes of another type with this charger.
Mains adaptors are only to be used together with the charger socket and the accompanying battery.
Only use charger in a dry environment at a temperature e between 10
◦
C and 40
◦
C.
Do not use the charger when it has been damaged.
Only have the charger and battery repaired by an authorized rep air agent.
Prevent the battery from short eirevifng. Make sure that the battery connections cannot touch metal objects.
Do not stoce the battery where the temperature may nse above 50
◦
C.e.g.in a car whieh has been parked in the sun.
Do not bum the battery.
Never attempt to open battery.
ELECTRICAL SAFETY
Check whether the voltage indicated on the type plate of the charger corresponds to the mains voltage.
DESCRIPTION
Your rechargeable screwdriver has been designed for light screwdriver applications.
CHARGING THE BATTERY
The battery must be charged before first use. Only after several charge and discharge cycles the battery will attan full
capacity.
Plug the plug of changer in the connection
Insert the charger in the wall socket the red indicator light goes on
Charge the battery for 3-5 hours.
Never charge the battery for more than 5 hours.
INSERTING AND REMOVING A SCREW BIT
Insert the screw bit in the bit holder.
In order to remove the screw bit, you pull it from the bit holder. In necessary use a pair of pliers.
SWITCHING ON AND OFF
To fasten a screw you press the on/off switch
To loosen a screw you press the on/off switch
To switch off the machine release the on/off switch.
Always wait until the motor has come to a complete standstill before changing the direction of rotation.