Valeport fastCTD, Руководство по эксплуатации

Страница: 16 / 30

Communications
©
2021
– Valeport Ltd
Page | 14
5.2 Command Codes
The fastCTD is designed to be used with Valeport’s DataLog X2 software. However, the
instrument will respond to a series of text commands that are detailed here. Note that this list is not
comprehensive, but will allow the standard functions of the instrument to be accessed. For more
detailed information, please contact Valeport Ltd.
Notes
 All commands must be confirmed using “Carriage Return” or “Enter” on the keyboard, with the
exception of the “Stop” command (#).

All commands are echoed back by the instrument as they are typed
5.2.1 Stop Command
The instrument can be stopped at any time by sending the ‘#’ character. The instrument returns a
‘>’, and waits for a further command.
5.2.2 Run Commands
R1 Collects rapid profile at 1 Hz
R2 Collects rapid profile at 2 Hz
R4 Collects rapid profile at 4 Hz
R8 Collects rapid profile at 8 Hz
R16 Collects rapid profile at 16 Hz
R32 Collects rapid profile at 32 Hz
M1 Performs continuous measurement at 1Hz
M2 Performs continuous measurement at 2Hz
M4 Performs continuous measurement at 4Hz
M8 Performs continuous measurement at 8Hz
M16 Performs continuous measurement at 16 Hz
M32 Performs continuous measurement at 32 Hz
Running at high update rates will provide increased temporal sensitivity but will result in noisier
data, especially optical.