Valeport BFM001, Руководство по эксплуатации, Страница: 10 / 32

Model 001 & 002 Flowmeter Operating Manual
MANUAL-1550859975-1 | issue: 1.1
©
2021
– Valeport Ltd
Page | 7
5 Operation
5.1 Switch On
ON Switch unit On using ON button. This is acknowledged by a beep from
the unit. This key is also used to toggle the unit Off at any point during
operation. Switching the unit On causes the following display to appear:
OPTIONS SET-UP This key selects the OPTIONS SETUP menu, which allows the user to
set up various hardware configurations (Logging On/Off [optional],
Beeper On/Off and Backlight On/Off [optional]). This menu also allows
access to the USER CALIBRATION menu, and to the LOGGING
SETUP menu. For further information refer to Section:
Options Menu
CONTINUE Places the unit in Run Mode. See Section: Running the Model 0012B
5.2 Running the Model 0012B
Pressing CONTINUE at the title screen, or pressing EXIT at any of the OPTION SET-UP screens
(see Section: Options Menu ) reveals one of the six possible displays shown below, depending on
what mode the unit was in when last used.
DISPLAY 1: FIXED AVERAGE, USER SET TIME DISPLAY:
DISPLAY 2: FIXED AVERAGE, USER SET PULSE COUNT DISPLAY:
I M P E L L E R C U R R E N T M E T E R D IS P L A Y M E T E R
V A L E P O R T M O D E L 0 0 1 2 B
V E R S I O N 3 . 0 0
< < < O P T I O N S S E T U P C O N T I N U E > > >