Valeport BFM001, Руководство по эксплуатации, Страница: 11 / 32

Section 5 | Operation
Page | 8
©
2021
– Valeport Ltd
DISPLAY 3: MOVING AVERAGE, USER SET TIME DISPLAY:
DISPLAY 4: MOVING AVERAGE, USER SET PULSE COUNT DISPLAY:
DISPLAY 5: FREE RUNNING, TIME DISPLAY:
DISPLAY 6: FREE RUNNING, PULSE COUNT DISPLAY:
An explanation of the different averaging modes can be found in section: Measurement Methods
SETUP Press this key to alter current sampling regime. See Section: Setting Up Running
Mode .
START
Unit will begin sampling in mode currently set. The real time data will be displayed
at the bottom of the screen, and a count of either pulses or seconds displayed at
the top. If the unit is in logging mode, the current record number will be displayed
at the top right hand side of the screen. If the data interface lead is connected, the
end of average values will also be sent to the PC.
STOP Press to cease sampling. This will force an early end to an averaging period
LOW BATT When there is 10 hours of battery life remaining (with backlight), this message will
be displayed at the bottom right hand corner of the screen (see DISPLAY 1 for an
example). The message will remain until batteries are replaced