Model 801 EM Current Meter
Page 12
© 2016 Valeport Ltd
to set the unit date and time. Refer to Section 4.6.
SUB OPTIONS
This enables the user to go into the sub – options menu which allows
direct EM communications with a PC [via data interface lead] for
viewing EM data and setting of the calibration coefficients. Refer to
Section 6. This sub-options menu also allows, if the options are fitted,
frequency outputs and alarms to be set.
EXIT
Puts the unit into Run Mode, using the hardware configurations
selected [see Section 4.3].
4.6. Logging Menu
Selecting
LOGGING MENU
at the
OPTIONS MENU
reveals the following display.
L O G G I N G M E N U
< < < S E T D A T E / T I M E
E X T R A C T
D A T A > > >
< < < R E S E T # I D E N T
E R A S E
M E M O R Y > > >
< < < V I E W
D A T A
E X I T > > >
SET DATE/TIME
Allows access to the
CHANGE DATE/TIME
screen. This allows the user to alter
the unit's internal clock, for the purpose of correctly time stamping the
recorded data. See Section 4.6.1.
RESET #IDENT
Sets the memory pointer to record #1 and updates the series letter. For
example, a second series of records would begin with record #001B.
VIEW DATA
Allows user to see logged data. See Section 4.6.2.
EXTRACT DATA
Allows user to upload stored data to a PC. See Section 4.6.3.
ERASE MEMORY
Clears all stored data from the unit and resets data series identification to
"A"; it does not reset
#IDENT
to zero which has to be done by the
RESET
#IDENT
key, which should be done first otherwise the series B identification
will be set. A screen will appear, requesting confirmation that the user
wishes to erase memory. Press YES to continue, or EXIT to return to
LOGGING
MENU
. If YES is pressed, a message will confirm that memory has been
erased. Press
EXIT
to return to
LOGGING MENU
.
EXIT
Returns user to OPTIONS MENU. Refer to Section 4.5.
