BUS BODY ELECTRONICS
9
2.6 Errors
2.6.1 Error detection mode
2.6.1.1 Activation
Press
and
buttons at the same time for 2 seconds
➔
Mode is active
– code input window is opened (Figure
12).
2.6.1.2 Entering the access code
➔
Changeable number of the access code blinks.
➔
Switch between numbers with
or
.
➔
Change the value of the blinking number with
or
.
➔
Confirm the code or cancel the entry with
.
2.6.1.3 Reading out errors
➔
Error code (F026 here) and occurrence count (1 here)
will be displayed (Figure 13) if the correct code is en-
tered.
➔
Scroll through the error codes with
or
.
➔
Reset the counter with
(after resetting, the coun-
ter shower the value 1 if the error persists).
2.6.1.4 Ending
Press
button for 2 seconds
➔
Normal operating display appears (Figure 14).
Note
If errors are present, the function symbol
blinks on the
display (Figure 11).
The warning symbol will not display for inactive/saved errors.
In order to display inactive errors, switch to Error detection
mode.
Figure 11 - SC600 errors
Figure 12 - SC600 access code entry
Figure 13 - SC600 reading out the error
code
Figure 14 - SC600 normal operating
display
