Valeo CC 185T Скачать руководство пользователя страница 4

WARRANTY TERMS

   Warrant Terms

VALEO Climatização do Brasil - Veículos Comerciais S/A warrants its products for 
two years in accordance with the terms listed below:

1 - The warranty will be valid for the period above specified, counting from the
date when the equipment is installed in keeping with the warrant certificate, 
even after the property there of has ben transfered.

2 – Should the equipment be installed by a third part, VALEO Climatização do 
Brasil - Veículos Comerciais S/A warrant only the product and not its instalations.

3 - During the stipulated period, the warranty completely covers the workman-
ship and spare parts used to repair defects duly identified as being:
premature failure of material and components defects used on its manufacture.

4 - Only a techinician from the VALEO Climatização do Brasil - Veículos Comerciais 
S/A  authorized  network  of  services  is  qualified  to  repair  the  defects  coverd 
under the warranty.

5  -  The  warranty  approval  is  subject  to  the  technical  analysis  of  the  defects 
shown in the components and operational conditions to which the equipment 
has been subjected.

6 - No claims will be accepted if the vehicle is still in use after the defect is 
found, even if there is lack of pieces, delay in transportation or any other such 
incident.

b) If the product suffers any damage caused by improper use, neglect, accident, 
failures caused by external agents and even lack of maintenance (see owner's 
manual) or services performed by unqualified person.

c)  If  the  warranty  certificate  and/or  the  serial  number  of  the  product  are 
adulterated, overwritten or damaged.

d) If defects or unsatisfactory performance are caused by the use of non original
spare parts and in disagreement with the technical specifications from VALEO 
Climatização do Brasil - Veículos Comerciais S/A.

  

8 - The Warranty Does Not Cover

a) Displacement of the bus for repairing of the equipment. In case the customer
requests  to  be  attended  in  the  same  place  where  products  is  operating,  the 
collection or not of the visitation charge will be the criterion of the authorized 
service provider.
b)  The  attending  to  the  consumer,  free  or  paid,  in  cities  that  do  not  have 
authorized services providers. So the expenses with displacement are the sole 
responsibility of the owner.
c)  Lack  of  proper  preventive  maintenance,  as  described  in  the  preventive 
maintenance item in this manual.
d)  Replacement  of  bearings,  belts,  filters  in  general  and  lubricating  oil,  since 
they are considered items of natural wear.
Bearings, belts and alternators have limited warranty as follows:

 

     - Bearings in general = 60,000km or 2 years, whichever occurs sooner.

      - Belts in general = 20,000km or 3 months, whichever occurs sooner.
      -  Alternators  =  2  years  with  no  mileage  limit,  however,  respecting  the 
conditions established in these warranty terms and the manufacturer's technical 
specifications.

e)  Loss  or  loss  of  profits  caused  by  the  stoppage  of  the  vehicle  due  to 
non-operation of the equipment.

  

7 - The Warrant Loses its Validity

a) If the installation or use of the product is not in accordance with the VALEO 
Climatização do Brasil - Veículos Comerciais S/A technical recommendations.

CC 185T - CC 205T - CC 205W

4

Содержание CC 185T


























Отзывы: