background image

 

 

 

 

 

 
 
   Issue 

 

1

 

947809 

CAUTION:  To reduce the risk of electric shock,

 

Do not remove cover.

 

No user serviceable parts inside.

 

Refer servicing to qualified service personnel.

 

CAUTION

 

RISK OF ELECTRIC SHOCK

 

DO NOT OPEN

 

This symbol indicates that dangerous

 

voltage constituting a risk of electric

 

shock is present within this unit.

 

This symbol indicates that there are

 

important operating and maintenance

 

instructions in the literature accompanying
this unit.

 

VIP-429A-D 

 

IP FLUSH MOUNT SPEAKER/CLOCK ASSEMBLY 

 

 

INTRODUCTION 

The VIP-429A-D IP Wall Speaker with Clock enables 
voice access and visual time indication to a single zone of 
paging over an IP-based LAN/WAN.  This allows page 
zone extension anywhere on the network.  The speaker 
level is adjusted via software during set up.  Clock 
synchronization is initiated via connection to any Network 
Time Protocol (NTP) server accessible via the network.  
The enclosure is made of steel with a durable powder 
coated finish.  The color of the enclosure can easily be 
changed to match any decor.  Power is provided to the 
VIP-429A-D via a Power over Ethernet (PoE) switch 
meeting the 802.3af specification. 
 

SPECIFICATIONS 
Access Methods

 

•     PBX, FXO Port using a VIP-811 
•     POTS telephone set using a VIP-811 
•     PBX, FXS Port using a VIP-821 
•     Valcom M Cast Page Group 
•     SIP–enabled telephone system 

 

Features 

 RJ-45 

network 

connection 

 802.3af 

compatible 

 

Network Time Protocol (NTP) synchronization 

 

Four digit time display 

 

DIMENSIONS/WEIGHT 

 

14.50” H x 13.00” W x 3.40” D 

       (36.93cm x 33.02cm W x 8.64cm D) 

 

Weight: 4.8 LBS (2.17 kg) 

 

Environment

 

Temperature: 

                                             0 to +40° C 

Humidity:     

                     0 to 85% non-precipitating 

 

Nominal Power Requirements

 

Via 802.3af PoE Ethernet Switch:

                          

Class 3 

 

 
 
 
 
 
 
 
 
 

 
 
 
 
 
 
 
 
 
 
 
Precautionary Designations 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

INSTALLATION 

FCC Information 

This equipment has been tested and found to 
comply with the limits for a Class A digital 
device, pursuant to Part 15 of the FCC Rules.  
These limits are designed to provide reasonable 
protection against harmful interference when 
the equipment is operated in a commercial 
environment.  This equipment generates, uses 
and can radiate radio frequency energy and if 
not installed and used in accordance with the 
instruction manual, may cause harmful 
interference to radio communications.  
Operation of this equipment in a residential area 
may cause harmful interference in which case 
the user will be required to correct the 
interference at his own expense

Отзывы: