Valcom VIP-428A-IC, Быстрое руководство, Страница: 3 / 4

3 947577
Figure 1. Network Connection
Figure 2. Connections
Call Switch Connection
The VIP-428A-IC provides a call switch input via
screw terminal connections, labeled Switch 1 and
Ground.
Setup
The VIP-428-IC will automatically acquire an IP
address (using DHCP) and connect to the
InformaCast server when connected to the
network and powered up. Information specific
to your application will need to be programmed
into the InformaCast server. Refer to the
InformaCast documentation for further
Information.
Mounting
Valcom offers three backboxes (not included) for
mounting the VIP-428A-IC speaker. The VB-S11
(surface mount), VB-A13 (angled surface mount)
and VB-R12 (recess mount) are all designed to fit
the VIP-428A-IC. Mount the backbox according to
the instructions provided with the backbox. After
mounting the backbox, connect the Ethernet cable
to the RJ-45 jack on the speaker. Mount the
speaker baffle to the backbox with the hardware
provided.
TECHNICAL ASSISTANCE
When trouble is reported, verify power is being
supplied to the unit and there are no broken
connections. If a spare unit is available, substitute
a spare unit for the suspected defective unit.
Assistance in troubleshooting is available from the
factory. Call (540) 563-2000 and press 1 for
Technical Support or visit our website at
http”//www.valcom.com
Valcom equipment is not field repairable. Valcom,
Inc. maintains service facilities in Roanoke, VA.
Should repairs be necessary, attach a tag to the
unit clearly stating your company name, address,
phone number, contact person and the nature of
the problem. Send the unit to:
Valcom, Inc.
Repair & Return Dept.
5614 Hollins Road
Roanoke, Va. 24019-5056
WARRANTY
Warranty information may be found on our website
at www.valcom.com/warranty.