background image

 

2 947823 

 

 
 
 
 

 

 
 
 
 
 
 
 
 

 
Figure 2. Mounting to an Electrical Backbox

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 
 
 
 
 

Figure 3. Mounting to a Wall Stud

 

 
 
 
 
Interconnections 

The only method of powering a VIP-148AL-IC  
IP Paging Horn is via a Power over Ethernet 
(PoE) switch or power injector meeting the 
802.3af specification.   
 
Make all required signal connections before 
connecting to Ethernet switch or power injector 
meeting the 802.3af specification.

 

 

Signal Connections 

Audio output connection is made from the Signal 
Output.  The RJ-45 connector on the horn is 
connected directly to the RJ-45 Signal Output 
socket on the Network Interface.  If additional 
length is required, any standard T568B 
extension may be used. See Figure 4. 
 

Network Connection  

As shown in Figure 4, the Network Interface has 
one RJ-45 network connector on the front panel.  
Use a standard Ethernet patch cable to connect 
the NETWORK connector of the Network 
Interface to an 802.3af compliant PoE port 
(100m maximum distance).

   

 

Status Indicator Lights 

The IP Link has 2 status indication lights located 
on network jack. 
 

Green LED: 

(Link)

 

Indicates Ethernet 

connection when illuminated.   

 

Yellow LED:

  (Activity) Indicator flashes to 

indicate network activity. 

 
Setup 

The VIP-148AL-IC will automatically acquire an 
IP address (using DHCP) and connect to the 
InformaCast server when connected to the 
network and powered up.  Information specific to 
your application will need to be programmed into 
the InformaCast server. Refer to the 
InformaCast documentation for further 
information. 

Отзывы: