3
947657
K1
K2
LINE
N.C
.
N.
O.
N.C
.
N.
O.
CO
M
CO
M
PHONE
+24VDC
+
-
Status
Link
Act
FXO Connection:
Connect standard analog FXS
circuit, capable of providing calling party
disconnect, to the VE8021/VE8021R via the rear
panel RJ-11 jack labeled
Line
. Tip and Ring
appear on pins 3 and 4 of these jacks.
Failover Connection:
Connect a standard
analog telephone to the VE8021/VE8021R via
the rear panel RJ-11 jack labeled
Phone
. Tip and
Ring appear on pins 3 and 4 of these jacks. In the
case of a device failure, the telephone will be
able to access the FXS circuit or single line port.
Relay Connections:
Access to the 2 form C
relays is provided via a six pin screw terminal
block. The relays are labeled K1 and K2. Each
relay is brought out on three terminals. The
common contact is the middle terminal with the
normally closed contact on the left and the
normally open contact on the right. Relay
contacts are rated for 1A @ 24VDC.
Front View
Rear View
Status Indicator Lights
The VE8021 has 3 status indication lights on the
front panel.
STATUS: I
lluminates at regular intervals during
normal operation. On steady indicates unit is in
reset mode.
LINK:
Indicates 100 Mbit Ethernet connection
when illuminated. No activity indicates 10 Mbit
connection.
ACT:
Indicator flashes to indicate network
activity.
Setup
Information specific to your application will need
to be programmed into the VE8021/VE8021R
using a computer. The PC used for programming
should be connected to the same subnet as the
VE8021/VE8021R. Setup will be done using the
IP Solutions Setup Tool. Download the latest
version of the free IP Solutions Setup Tool from
Valcom website at
www.valcom.com/vipsetuptool.
