Valcom VE8012A, Быстрый старт

Страница: 3 / 5

3 947460
+24V DC
1
PHONE PHONE
2
K1
K2
N.
C. N.
O. N.
C. N.
O. COM COM
K3
COM N.
O. COM N.
C. N.
O. N.
C.
K4
If power is supplied via the barrel connector,
make sure all signal connections are secure.
Attach the unit to the network via the front panel
RJ-45 Ethernet connector. Apply power by
plugging the power supply in to the
VE8012A/VE8012AR via the barrel connector on
the rear of the VE8012A/VE8012AR.
Network Connection
The VE8012A/VE8012AR has one RJ-45 network
connector on the front panel.
Use a standard Ethernet patch cable to connect
the VE8012A/VE8012AR to an Ethernet switch.
If the Ethernet switch is 802.3af compliant, the
VE8012A/VE8012AR will draw power from it.
Signal Connections
On the back panel, the VE8012A/VE8012AR has
2 RJ-11 jacks for telephone connection and 2
terminal blocks for relay connections.
Telephone Connections: Connect standard
analog telephones to the VE8012A/VE8012AR
via the back panel RJ-11 jacks labeled Phone 1
and Phone 2. Tip and Ring appear on pins 3 and
4 of these jacks.
Relay Connections: Access to the 4 form C
relays is provided via two six pin screw terminal
blocks. The relays are labeled K1, K2, K3 and
K4. Each relay is brought out on three terminals.
The common contact (COM) is the middle
terminal with the normally closed (N.C.) contact
on the right and the normally open (N.O.) contact
on the left. Relay contacts are rated for 1A @
24VDC.
Rear View
Setup
Information specific to your application will need
to be programmed into the VE8012A/VE8012AR
using a computer. The PC used for programming
should be connected to the same subnet as the
VE8012A/VE8012AR.
Setup will be done using the IP Solutions Setup
Tool. Download the latest version of the free IP
Solutions Setup Tool from Valcom web site at
www.valcom.com/vipsetuptool.
Status Indicator Lights
The VE8012A/VE8012AR has 3 status indication
lights on the front panel:
STATUS: Illuminates at regular intervals during
normal operation. On steady indicates unit is in
reset mode.
The network jack provides two LED indicators:
Green LED:
(Link) Indicates Ethernet connection
when illuminated.
Yellow LED:
(Activity) Indicator flashes to
indicate network activity.