Valcom VE8012A, Быстрый старт

Страница: 1 / 5

1 947460
ISSUE 3
VE8012A/VE8012AR
DUAL NETWORKED STATION PORT
INTRODUCTION
The VE8012A/VE8012AR Dual Networked
Station Port allows most loop start terminal
devices to be connected to a managed IP-based
LAN/WAN.
SPECIFICATIONS
Access Methods

PBX, FXO Port

POTS telephone set
Features

RJ-45 for network connection

2 RJ-11 telephone connections

4 Relays with Form C contacts

Front panel activity LED

Network activity LEDs

2 RENS

2.5mm jack for external power

Power over Ethernet (PoE) 802.3af
compatible
Dimensions/Weight

1.75 H x 6.75" W x 9.5" D
(4.45cm H x 17.15cm W x 24.13cm D)

Weight: 1.75 lbs. (0.80 kg)
Nominal Specifications
Input Impedance: 600 Ohms
Input Level: -10dBm
Output Impedance: 600 Ohms
Output Level: - 10dBm nominal
Relay Current: 1 AMP @ 24VDC
Nominal Power Requirements
Via rear panel barrel connector:
Voltage: 24VDC
Current: 325mA
Via 802.3af (PoE) Ethernet Switch:
802.3af: Class 3
VE8012A
VE8012AR
Environment
Temperature: 0 to +40° C
Humidity: 0 to 85% non-precipitating
INSTALLATION
NOTE: The telephone system referred to in
this manual is the customer premise
equipment such as an electronic key system,
a PBX or a dedicated single line telephone
sets. The VE8012A/VE8012AR is not intended
for direct or indirect connection to the public
telephone network. When used with a
customer premise telephone system such as
a key system or PBX system, these units are
interfaced to the system via a fully protected
system central office port, which is a fully
protected interface device. Also, the host
system must be configured to disallow central
office trunk conferencing in order to prevent
indirect connection to the public network.