3
947651
Status
Link
Act
K1
K2
INPUTS
+24VDC
AUDIO CC
AUDIO
OUT
AUX
IN
N.C
.
N.O
.
N.C
.
N.O
.
CO
M
CO
M
Network Connection
The VE8001/VE8001R has one CAT-5 RJ-45
network connector on the front panel.
Use the supplied CAT-5 patch cable to connect
the VE8001/VE8001R to an Ethernet switch.
If the Ethernet switch is 802.3af compliant the
VE8001/VE8001R will draw power from it.
Front View
Rear View
Signal Connections
The VE8001/VE8001R has 4 I/O connectors on the
rear panel:
RCA jack for AUX audio input
2 Pin screw terminal for audio output
6 Pin screw terminal for relay connections
4 Pin screw terminal for audio input and contact
closure input
AUX Input:
Local audio input is via the rear panel
RCA jack. Nominal input impedance is 600 Ohms.
Connect any compatible audio source using an
RCA patch cable.
Audio Channels:
Access to the networked audio is
via screw terminals on the rear panel.
The audio input and contact closure input share a
four pin screw terminal connection. Neither input is
polarity sensitive. The contact closure is on the
right two terminals and is labeled “CC”.
Relay Channels:
Access the two form C relays is
provided via a six pin screw terminal block. The
relays are labeled K1 and K2. Each relay is
brought out on three terminals. The common
contact is the middle terminal with the normally
closed contact on the left and the normally open
contact on the right. Relay contacts are rated for
1A @ 24VDC.
Relays programmed for Supervise remain activated
unless power is lost or a supervised VoIP device
can be monitored.
Status Indicator Lights
The VE8001/VE8001R has 3 status indication lights
on the front panel:
STATUS:
Flashes to indicate power.
LINK:
Indicates 100 Mbit Ethernet connection
when illuminates. No activity indicates 10 Mbit
connection.
ACT:
Indicator flashes to indicate network activity.
SETUP
Information specific to your application will need to
be programmed into the VE8001/VE8001R using a
computer. The PC used for programming should
be connected to the same subnet as the
VE8001/VE8001R. Setup will be done using the IP
Solutions Setup Tool. Download the latest version
of the free IP Solutions Setup Tool from the Valcom
web site at www.valcom.com/vipsetuptool.