Valcom VBBA2-30-18, Техническое руководство

Страница: 10 / 18

VTM-05-005F
6
SECTION 2
OPERATION
2-1 INTRODUCTION. This chapter provides operating instructions for the antenna.
2-2 CONTROLS AND INDICATORS. The antenna contains no controls or indicators.
2-3 OPERATING PROCEDURES.
2-3.1 Operator Turn-On. No operator turn-on procedures apply since no power is required to
operate the antenna. However, the antenna is coupled to RF equipment (transmitter/receiver)
and to associated systems which may require energizing. For operating instructions, consult
the appropriate technical manuals.
2-3.2 Modes of Operation. The antenna operates automatically, and no operator intervention is
required other than interconnecting the associated transmitter or receiver with the antenna.
2-3.3 Operation Under Interfering Conditions. No additional or alternate instructions are necessary
to operate the antenna under interfering conditions.
2-3.4 Operator Turn-off. Since no power is required to operate the antenna, no operator turn-off
is required. However, the specific equipment connected to the antenna may require operator
turn-off. Consult the associated technical manuals for turn-off procedures.
2-3.5 Emergency Operation. No additional or alternate steps are necessary to operate the antenna
under emergency conditions.
2-3.6 Emergency Turn-off. The antenna requires no emergency turn-off. For emergency turn-off
of specific equipment connected to the antenna, consult the associated technical manuals.