32
Valcom, Inc.
5614 Hollins Road
Roanoke, VA 24019
USA
P. 540-563-2000
F. 540-362-9800
www.valcom.com
Number of Red Flashes
1,2
3,4,5
6,7,8
Error Message
Error detected in second hand. Confirm that hands
are not hitting each other, then repeat the test.
Error detected in the minute or hour hand. Confirm
that hands are not hitting each other, then repeat
the test.
Call tech support.
Diagnostic Test #3 - Manufacturing Default (Original Only)
The purpose of Diagnostic #3 is to bring the clock
back to 12:00:00 and reset to the manufacturer’s
default.
Diagnostic #3 may be enabled by holding down the
diagnostic button for five seconds. If the Valcom
Wired clock is performing this diagnostic, then a
green LED on the back will flash three times with
a five second break between each flash. The LED
will continue to flash green until the diagnostic is
complete. The clock will confirm that the diagnostic
is complete when the LED shines a different color.
If the LED is flashing red:
If the LED is a solid green and all of the clock hands are pointing to 12, the test was completed successfully.
At the end of Diagnostic three, the clock hands will be set to 12:00:00. The clock will not resume normal
operation until the power has been recycled.
Button
LED
