VSP-V-9936A
Issue 5
1
947961
V-9936A
SIX LINE C. O. AUDIBLE RING UNIT
INTRODUCTION
The V-9936A is a Six Line C. O. Audible Ring Unit to
be used with Electronic key and PABX telephone
systems.
These instructions contain the specifications and
information necessary to install, operate and maintain
the Six Line C. O. Audible Ring Unit.
When installing the V-9936A, notify the local
telephone company with the following information:
•
The telephone number of the lines to which the
V-9936A will be connected
•
The FCC Registration number of the V-9936A,
which is BAF9I7-12995-RG-N
•
The ringer equivalence number (REN): 0.7B
SPECIFICATIONS
Purpose
•
Monitors up to six C. O. Lines or PABX station
numbers and gives a common audible tone signal
and a dry relay contact closure to indicate
incoming ring on any of the lines.
•
V-9936A units may be multiplied to supervise
additional lines.
Applications
•
Central office lines
•
PABX station numbers
•
Phone system night ring relay
Features
•
Monitors six lines
•
Units may be multiplied for additional lines
•
Provides interrupted electronic warble tone
output for tone signaling
•
Provides interrupted dry contact closure output
to activate loud bells
•
Input for a night switch (On/Off switch)
•
Built-in 66 type connection block
•
May be connected to an existing paging system
•
Drives up to 150 Valcom One-way Amplified
Speaker Assemblies
•
Drives up to two 45 Ohm Talkback Speakers
•
May be used with One-way or Talkback Paging
Systems
•
May be used with 70 Volt Paging Systems
•
Ring tone will override any page in progress
•
Volume control
•
Power reversal indicator
•
Powered by -24VDC "B" battery
Capacity
•
Each V-9936A will provide signaling for six C.O.
lines or extension numbers
•
Up to four units may be multiplied for monitoring
of 24 lines
•
May be connected to o ne zone of a paging
system
•
The V-9936A will drive two 45 Ohm talkback
speakers or 150 one-way amplified speaker
assemblies
•
The dry contact closure is rated at 1.0 Amp @
105VAC, or 2.0 Amps @ 24VDC.
