background image

 

 

VSP-V-1050C 

 

 

Issue 8 

 

1

 

947050 

 

 

 
   

 

V-1050C - 5 WATT BI-DIRECTIONAL HORN/ 

 

ONE-WAY AMPLIFIER ASSEMBLY

 

 
 

INTRODUCTION

 

The V-1050C is a Bi-directional, 5 Watt One-way 
Amplified Horn Assembly.  The V-1050C consists of 
two horn speakers positioned on a common mounting 
frame with a built-in one-way 5 Watt amplifier. 
 

SPECIFICATIONS

 

Features

 

• 

5 Watts  

• 

Self-contained amplifier and volume control 

• 

Simplifies paging horn installation 

• 

Vertical or horizontal mounting 

 

Dimensions/Weight

 

• 

9.60" H x 8.20" W x 9.30" D 

 

(24.38cm H x 20.83cm W x 23.62cm D) 

• 

Weight:  6.3 lbs. (2.86 Kg) 

 

Power Requirements

 

• 

Unfiltered -24VDC ("B" Battery) 300mA 
maximum 

 

Environment

 

• 

Temperature: 

-20 to +55 degrees C 

• 

Humidity: 

0 to 95% non-precipitating 

 

DESIGN

 

General

 

The V-1050C may be used to provide one-way paging 
from any Va lcom one-way or talkback page control 
unit.  A standard Valcom paging system is made up of 
three basic components: 

• 

Page Control Unit 

• 

Speakers 

• 

Power Supply 

 
 

 

 
 
Consult Valcom's One-way Paging VSP for detailed 
information on selecting the control unit and power 
supply. 
 

Special Applications

 

The V-1050C may be connected directly to the 
speaker in most electronic key telephones to amplify 
the level of the speaker and broadcast it to a large 
area.  A power supply will also be required. 
 
The V-1050C may be used to expand a constant 
voltage (25/70/100 Volt) paging system without 
placing an additional load on the amplifier by adding a 
V-1095, 70V Paging Expander.  A power supply will 
also be required. 
 

Coverage

 

Refer to Table 1 for coverage of this horn assembly.  
The first figure given is the side to side distance to 
use when mounting the horns.  The second figure is 
the front to back distance between horns.  The third 
figure is the total square footage the assembly will 
cover. 
 
 
 
 
 
 

Отзывы: