manualshive.com logo in svg
background image

 

 

                                   947779                                                 

 
 
 
 
 
 
 
 
 
 
 
 
 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
INSTALLATION

 

Mounting 

The VIP-490AL-IC Network Interface is designed 
for wall or table mounting and must be within 100 
meters of the network switch. 
 

Wall: 

Using the wood screws and mounting 

brackets provided, secure the VIP-490AL-IC 
Network Interface to the wall. 
 

Mounting (Horn)

 

Flush Mount using Mounting Screws 

The cardboard packing material in which the horn is 
shipped also serves as the template for flush 
mounting.  Using the template, mark the location of 
opening and mounting holes on wall.  Drill holes 
appropriate to mounting hardware and cut out the 
opening.  Make appropriate wiring connections and 
test the speaker for operation.  Using appropriate 
mounting screws (not furnished) drill and mount the 
flange as shown.

UNIVERSAL BRACKET

 

Loosen or separate the universal bracket leaves by 
loosening or removing the handle and hardware.  
Using the back leaf as a template, mark the wall 
through the mounting holes.  Drill and mount to the 
wall using appropriate screws (not furnished) or 
mount directly to a junction box.  Mount the 
T-bracket to the back of the horn as shown using 
the (2) ½ inch screws provided. 
 

Power Connections

 

The only method of powering a VIP-490AL-IC 
Network Interface is via a Power over Ethernet 
(PoE) switch or power injector meeting the 802.3af 
specification.  
Make all required signal connections before 
connecting to Ethernet switch or power injector 
meeting the 802.3af specification. 

 

Network Connection 

The VIP-490AL-IC Network Interface has one  
RJ-45 network connector, and one RJ-45 horn 
connector.  Use standard Ethernet patch cable to 
connect the NETWORK connector of the           
VIP-490AL-IC Network Interface to a PoE Ethernet 
switch.  
 

Signal Connections 

Audio output connection is made from the Signal 
Output.  The RJ-45 connector on the horn is 
connected directly to the RJ-45 Signal Output 
socket on the IP Link.  See Figure 1. 

 

 If additional length is required, any standard 
T568B extension may be used. See Figure 2

 

If required, a normally open call button may be 
connected to the white blue pair (pins 4 and 5) of 
the HORN RJ-45 connector.  See Figure 2. 

 

Status Indicator Lights 

The VIP-490AL-IC has 2 status indication lights 
located on network jack: 

 

Green LED:  

(Link) Indicates Ethernet connection 

when illuminated. 

 

Yellow LED: 

(Activity) Indicator flashes to indicate 

network activity. 

 

Setup 

The VIP-490AL-IC will automatically acquire an IP 
address (using DHCP) and connect to the 
InformaCast server when connected to the network 
and powered up.  Information specific to your 
application will need to be programmed into the 
InformaCast server. Refer to the InformaCast 
documentation for further information. 

IMPORTANT SAFETY INFORMATION 
CONSIGNES DE SÉCURITÉ IMPORTANTES 
 1. Read these instructions. 
     

Lisez ces instructions.

 

 2. Keep these instructions. 
     

Conservez ces instructions.

 

 3. Heed all warnings. 
     

Respectez tous les avertissements.

 

 4. Follow all instructions. 
     

Suivez toutes les instructions.

 

 5. Do not use this apparatus near water. 
     

Ne pas utiliser cet appareil près de l'eau.

 

 6. Clean only with dry cloth. 

     

Nettoyer avec un chiffon sec.

 

 7. Do not block any ventilation openings.  Install in accordance with the manufacturer’s 
     instructions. 
     

Ne pas bloquer les ouvertures de ventilation. Installer formément aux instructions du 

     fabricant.

 

 8. Do not install near any heat sources such as radiators, heat registers, stoves or other 
     apparatus (including amplifiers) that produce heat.  
     

Ne pas installer à proximité de sources de chaleur telles que radiateurs, registres de 

     chaleur, poêles ou autres appareils (y compris les amplificateurs) produisant de la chaleur.

 

9. 

 

Do not defeat the safety purpose of the polarized or grounding-type plug.  A polarized plug 

     has two blades with one wider than the other.  A grounding type plug has two blades and a 
     third grounding prong.  The wide blade and the third prong are provided for your safety.  If 
     the provided plug does not fit into your outlet consult an electrician for replacement of the  
     obsolete outlet. 
     

Ne pas contourner le dispositif de sécurité de la fiche polarisée ou de mise à la terre. Une  

     fiche polarisée possède deux lames dont une plus large que l'autre. Une fiche de terre a  
     deux lames et une troisième broche de mise à la terre. La lame large et la troisième  
     broche sont fournies pour votre sécurité. Si la fiche fournie ne rentre pas dans votre prise,  
     veuillez consulter un électricien pour le remplacement de la prise obsolète.  

10.Protect the power cord from being walked on or pinched particularly at plugs, convenience 
     receptacles and the point where they exit from the apparatus.

 

11.Only use attachments/accessories specified by the manufacturer.  
     

N'utilisez que des fixations / accessoires spécifiés par le fabricant.

 

12. Use only with the cart, stand, tripod, bracket or table specified

 

 

      by the manufacturer or sold with the apparatus.  When a cart is  
      used, use caution when moving the cart/apparatus combination 
      to avoid injury from tip-over. 
      

Utilisez uniquement avec le chariot, stand, trépied, support ou table spécifié par le 

      fabricant ou vendu avec l'appareil. Quand un chariot est utilisé, Soyez prudent lorsque 
      vous déplacez l'ensemble chariot / appareil pour éviter des blessures dues au  
      renversement.

 

13. Unplug this apparatus during lightning storms or when unused for a long period of time. 
      

Débranchez cet appareil pendant les orages ou lorsqu'il n'est pas utilisé pendant une  

      longue période de temps.

 

14. Refer all servicing to qualified service personnel. Servicing is required when the  
      apparatus has been damaged in any way.  Such as when the power supply cord or plug is  
      damaged, liquid has been spilled, objects have fallen into the apparatus or the 
      apparatus has been exposed to rain or moisture and does not operate normally or has 
      been dropped. 

      Confiez toute réparation à un personnel qualifié. Une réparation est nécessaire lorsque  
      l'appareil a été endommagé de quelque façon. Par exemple lorsque le cordon  
      d'alimentation ou la fiche est endommagé, du liquide a été renversé, si des objets sont  
      tombés dans l'appareil ou le appareil a été exposé à la pluie ou à l'humidité et ne  
      fonctionne pas normalement ou s'il est tombé.

 

Отзывы: