STEP 1
STEP 2
UNFOLDING THE CO-RIDER
MUD GUARD INSTALLATION
Attach the Mud Guard (F) on to the wheel housing in a way that it aligns with square hole (S1)
with the flat side facing inward.
Insert one M4 screw (G) into the hole (G1) and secure it. Repeat this procedure for the second
Mud Guard on the other side.Test that both Mud Guards are securely fastened.
Attaching the Mud Guard
Installed Mud Guard
1.1 Press button (1) and lift the handle up
till it is fully extended.
1.2 Pull the two sections in opposite directions
until you hear the centre shaft click into the
locked position.
1
G
F
F
A
A
A
G1
S1
S1