VALCO MELTON D4-L, Руководство пользователя

Страница: 36 / 113

MUS01210202 07/01/2020
MELTON, S.L.U. - POLIGONO INDUSTRIAL AGUSTINOS CALLE G-34,31160 ORCOYEN, NAVARRA
TEL: 00 34 948 321580 Fax: 00 34 948 326584 e-mail: melton@melton.es http://www.valcomelton.com
31
Sensor faults:
If there is a short circuit in one of the measuring sensors, the equipment will
display “CCC” instead of the temperature for the part (tank, hose, gun) involved. If an
open circuit sensor fault is detected, the display will show “AAA” instead of the
temperature.
When an alarm of this kind occurs and the relevant channel is on, the amber LED
will light up, the external alarm will be switched on and the red LED will flash on and off
for 2.5 minutes. If all the problems have not been solved after 2.5 minutes, the red LED
will remain on all the time, the outputs will be blocked (at the main switch) and the
equipment will cease to function.
Filter change alarm:
We get a filter change alarm once the equipment reaches 2000 hours (P10, by
default 2000 hours) of work. We can recognize this alarm when the three leds pointed
below Start blinking at the same time (Red+Green). We can reset the alarm by
selecting channel P10 and push clock button.
Alarm reset process as follows:
Flashing leds