FIGURE P- TETHER STRAP
36. Your stroller has been equipped with a safety
tether strap. This strap has been designed to
always keep your stroller within constant reach.
IMPORTANT: ALWAYS SLIP THE LOOP IN THE STRAP
SECURELY OVER YOUR WRIST WHENEVER A CHILD IS IN
YOUR STROLLER.
FIGURE A - USING YOUR HARNESS
Your stroller is fitted with our unique
multi point safety harness system.
EACH child MUST always be harnessed
while in the stroller.
Please read these instructions
carefully before use.
TO ClOSE yOUR HARNESS
37. Slide the shoulder strap buckle (a) into the
housing of the waist strap buckle (b), forming a
complete buckle
38. Repeat for the opposite side.
FIGURE B
39. Insert the completed buckle (c) in the buckle
housing (d) until it engages securely in place.
40. Repeat for the opposite side
.
FIGURE C
41. Carefully adjust the harness straps to snugly
fit your child by adjusting the Sliders located on
all Shoulder Straps, Waist Straps and the Crotch
Strap (e).
Your harness can be adjusted for even more comfort
for smaller or larger children by threading the
harness webbing through the adjusting ‘sliders’ in
either direction, you can change the length of the
webbing thus making them tighter or looser over
your child’s torso.
The harness should be snugly fitted to the baby’s
body, tight enough so that the baby cannot wriggle
itself free of the straps but loose enough so as not
to cause the baby any discomfort.
IMPORTANT WARNING: ALWAYS TEST THAT ALL LATCHES ARE
SECURELY ENGAGED BEFORE USE.
P
Q
R
S
a
a
b
b
c
e
d
