background image

Thank you for purchasing a quality VALCO BABY product. Please read and follow the instructions outlined in 

this guide carefully. Familiarise yourself with the construction and safety features; be sure that you understand 

all the warnings and safety guidelines before use. 

Retain this guide in a safe place for future reference.

PRODUCT REFERENCE GUIDE

Due to our policy of continuous product development, this product is 

constantly evolving. It is possible that some features or procedures outlined 

here have changed since this document was written. 

If you are unsure of any procedure shown here, please contact us via the web 

at [email protected] to obtain the most up to date information before use. 

Include the batch number, which can be found on a sticker on the frame.

All pictures and diagrams herein are provided for illustration purposes only. 

Actual product, colour or fabric may vary. VALCO BABY reserves the right 

to modify or alter any specification or colour without notice or obligation to 

modify any product previously purchased

REBEL Q STROLLER

WITH OPTIONAL 

BASSINET ACCESSORY

FURTHER INFORMATION

valcobaby.com.au

© Copyright VB 2014

vs270214

Find us on:

Содержание REBEL Q









Отзывы: