8>SEAT RECLINE
The stroller seat has 3 positions. To recline
or incline the seat simultaneously push the
adjusting buttons located on either side of
the seat housing (p) and move the seat into
the desired position.
NOTE: SPECIAL CARE MUST BE TAKEN
WHEN ADJUSTING THE SEAT POSITION
WITH A CHILD IN THE STROLLER.
9>BRAKES
Press down on the red brake lever (q)
located on the rear axle to simultaneously
engage the brake in both rear wheels.
To release, press down on the shorter leg
with your foot.
IMPORTANT WARNING: ALWAYS TEST
THAT THE BRAKES ARE SECURELY
DISENGAGED BEFORE USE.
10>FOOTREST
To raise the footrest simply lift the end up to
the desired position. To lower your footrest,
simultaneously press the two adjusting
buttons (r) on either side of the footrest
allow it to drop down.
11>HARNESS
Your stroller harness is specifically designed
with many built in safety features.
This includes the requirement that, when
opened, all straps are released so that no
dangerous loops can be formed causing a
strangulation hazard.
WARNING: YOUR CHILD MUST ALWAYS
BE HARNESSED WHEN IN THE STROLLER
Closing your harness: Slide each of the
shoulder strap bottom guides (s) into the
corresponding channel (t) on the top of each
side strap prong. Insert each completed prong
into the central buckle housing (w).
Carefully adjust the harness straps to snugly fit
your child by adjusting the sliders (v) located
on each strap. The harness should be fitted
to your child’s body, tight enough so that they
cannot wriggle free of the straps but, loose
enough, so as not to cause any discomfort.
For even more flexibility, the height at which
your shoulder straps are fitted to the stroller
can be adjusted at 3 points(v).
To change the shoulder strap position:
From the rear of the seat, thread the top of
the strap back through the harness slot (it
fits through the slot.
Rethread the strap back through the desired
slot from the front of the seat
Opening your harness: Press the central
housing button (w). This will release both
side prongs from the central housing.
The shoulder and waist straps will release
automatically from each other.
If the shoulder and waist straps do not
automatically disengage from each other,
manually slide the guides of the waist
channels. Your harness will separate into 5
sections.
IMPORTANT WARNING: WHEN NOT IN
USE, BE SURE THE SHOULDER AND WAIST
STRAPS ARE ALWAYS DISCONNECTED FROM
THE CENTRAL HOUSING AND EACH OTHER.
12>HANDLE
Your handle can be adjusted to multiple
positions. Press the centre locking button
(x) while simultaneously moving the handle
up or down.
Releasing the locking button will allow the
handle to lock into the next position.
12>FOLDING
Adjust the handle down to its lowest
position. While still keeping the central
locking button (x) pressed, hold the frame
lock button (z) firmly depressed. Continue to
push the handle firmly in the direction of the
chassis, past the frame lock until it engages
the lock spring. This will unlock the frame.
Press down on the handle to fold the frame
and continue to ease the handle downward
until the frame is fully collapsed and the
chassis locks closed at (a). Adjust the seat
to its most reclined position as outlined in 8.
Depending on which way your seat is facing
when folded, your Rebel Q Sport seat can
be made to fold even more compactly
by simultaneously pressing the transport
position buttons (y) and seat adjustment
buttons (p), thereby allowing the seat to
swing even further downward.
IMPORTANT: WHEN REOPENING THE
STROLLER, BE SURE TO LIFT THE SEAT
BACK UP INTO THE USE POSITION
BEFORE USE!
