background image

Thank you for purchasing a quality VALCO BABY product. Please read and follow the instructions outlined in 

this guide carefully. Familiarise yourself with the construction and safety features; be sure that you understand 

all the warnings and safety guidelines before use. 

Important: Please read the following instructions carefully before assembling this product. Retain this 

guide in a safe place for future reference. 

PRODUCT REFERENCE GUIDE

STROLLER

valco

baby

© Copyright VE 2009

Due to our policy of continuous 

product development, this product 

is constantly evolving. It is possible 

that some features or procedures 

outlined here have changed since 

this document was written. If you are 

unsure of any procedure shown here, 

please contact us via the web at 

info@

valco.com.au

 to obtain the most up to 

date information before use. Include 

the batch number, which can be found 

on a sticker on the frame.

All pictures and diagrams herein are 

provided for illustration purposes only.  

Actual product, colour or fabric may 

vary. VALCO BABY reserves the right 

to modify or alter any specification 

or colour without notice or obligation 

to modify any product previously 

purchased

FURTHER INFORMATION

In Australia/New Zealand

www.valco.com.au

In North America only

www.valcobaby.com

1800 610 7850

ION

Содержание ION STROLLER









Отзывы: