VALBERG VAL-FHB, Инструкция по эксплуатации

Страница: 17 / 36

15 EN
Product usage
B
Before first use
WARNING!
• This unit can only be used in the no-volume zone,
i.e. outside of volumes 0 , 1 and 2 or the hidden zone in
a bathroom, in accordance with the requirements of
the NF C 15-100 French electrical installation standard.
• We recommend contacting a qualified electrician for
any assistance.
• Correctly connect the unit and do not leave it within the
reach of unsupervised children.
Use
• Before using this unit, make sure that it has been placed on a flat, stable surface. This
unit is equipped with a tip-over switch that shuts off the unit in the event it is tipped over
or placed on an unstable surface.
• Check that the unit’s voltage corresponds to the mains voltage (230 V wall socket). Once
the unit is plugged in, turn the thermostat knob and the indicator light will come on.
• Turn the thermostat knob clockwise to “-”, then turn the knob from “ 0 ” to “ ” to activate
the fan. Check that everything is working correctly.
• Turn the function selection knob from “ I ” to “ II ” to select the desired temperature (hot/
very hot).
To adjust the speed, turn the knob from 0 to I or II :
0 Off
Fan
I Hot
II Very hot
• To maintain the room temperature once the desired temperature has been reached:
turn the thermostat knob anticlockwise until the indicator light turns off. The desired
temperature will be maintained via the thermostat function.