VALBERG BI 1D 199 F W742C, Инструкция по эксплуатации

Страница: 15 / 58

8 EN
Using the appliance
B
Location
of heat sources such as radiators, boilers, sunlight, etc. Make sure that air can circulate freely
around the back of the unit. To guarantee optimum performance, appliances which are positioned
below an overhanging element should be at a minimum distance of at least
100 mm between
the top of the appliance and the wall element. Ideally the appliance should not be positioned
underneath wall elements. The equipment can be correctly levelled by adjusting the feet at the
bottom of the appliance.
CAUTION
It must be possible to disconnect the appliance from the
electricity supply; The plug must be easily accessible after
installation
Electrical connection
Before connecting the appliance, make sure that the voltage and frequency indicated on the
nameplate correspond to your domestic power supply. This appliance must be earthed. There
is a pin in the power supply plug for this purpose. If the household socket is not earthed, you
should contact a qualified electrician to connect the appliance to a separate earthing point in
line with the statutory requirements for power supplies. The manufacturer accepts no liability
if the above-mentioned safety measures are not respected. The appliance is compliant with
European directives.
Initial use
Cleaning the inside
Before using the appliance for the first time, wash the interior and all internal accessories with
lukewarm water and a neutral soap to remove the characteristic odour of new products. Dry
thoroughly.
WARNING
Do not use abrasive powders or detergents as they will
damage the finish.