VALBERG 972442, Инструкция по эксплуатации

Страница: 20 / 44

18 EN
NOTE: The display will enter sleep mode after 30 seconds of inactivity, but the
fan will continue to run. Press the button to completely switch off the fan or
press any other button to wake up the display.
3. Press the button or button on the fan and remote control, respectively, to select
one of the following modes:
Icon Mode Description
Ion Purifies the air. This mode can only be used in fan mode.
Fan
Press the fan’s button repeatedly or the +/- buttons on the
remote control to select a fan speed from 1 to 10.
Sleep
Press the fan’s button repeatedly or the +/- buttons on the
remote control to select a sleep speed from 1 to 3.
AI The fan will automatically adjust the speed level according to
the changes in ambient temperature.
NOTE: When the ambient temperature exceeds 40 °C, the
fan will remain on the maximum speed. When the ambient
temperature drops below 10 °C, the fan will remain on the
lowest speed.
4. Press the button once to enter the timer mode. Next, press the fan’s button repeatedly
or use the +/- buttons on the remote control to set the timer so that the fan will turn off
after 1-12 hours (depending on the time set). To deactivate the timer, set the time to 0h .
5. Press the button to oscillate the fan and rotate it 60 degrees. Press the button to
stop it.
NOTE:
• After 15 hours of continuous operation, the fan’s safety function will
automatically turn off the fan.
• When you turn off the fan, it will remember the last settings and use these
when next turned back on. However, the speed in AI mode or timer settings
will not be saved.
6. To turn off the fan, press the button. The screen will then turn off. Unplug the unit
from the mains socket to completely switch it off.
Product usage
B