VALBERG 15S39 D S701T, Инструкция по эксплуатации

Страница: 40 / 152

33 EN
Useful information
C
Automatic failure alert and action
Failure
code
Dose of brightener Indicator
F5 Insufficient amount of water
Ensure that the water inlet tap is open and that the
water is flowing.
Separate the hose from the tap and clean the hose
filter.
Contact the service department if the error persists.
F3 Continuous water inlet Turn off the tap and contact the service department.
F2 Unable to drain water
The water drain and filters may be blocked.
Turn off the programme.
If the error persists, contact the service department.
F8 Heating error Contact the service department.
F1 Water overflow
Unplug the appliance and turn off the tap
Contact the service department.
FE Faulty electronic board Contact the service department.
F7 Overheating Contact the service department.
F9 Divider position error Contact the service department.
F6 Heater sensor failure Contact the service department.
Installation and repair procedures should always be carried out by an authorised professional
from the service department to avoid any risks. The manufacturer declines all responsibility
for any damage resulting from procedures carried out by unauthorised persons. Repairs
should only be carried out by technicians. When a component needs to be changed, ensure
that original spare parts are used.
Incorrect repairs or failure to use original spare parts can cause considerable damage and
the user is exposed to a considerable risk.
The contact information for the customer service can be found on the back of this document.
According to the relevant ecodesign order, original and functional spare parts can be obtained for
at least ten years from the date of marketing of your appliance in the European Economic Area.