Vaisala CG31, Руководство пользователя

Страница: 21 / 29

Chapter 3 _______________________________________________________________ Installation
VAISALA _______________________________________________________________________ 19
- Connect the cable to the connector in the GPS antenna.
0705-207
Figure 17 Connecting the Cable to the GPS Antenna
Disassembly for Transportation
To disassemble the antenna set, do the following:
1. If you have used the foot pads under the tripod legs, remove
them and put them in the tools bag.
2. Disconnect the cables from the sounding system and wind the
cable on the cable holder on the tripod leg in the pattern of
figure eight. This will prevent the cable from becoming twisted
and difficult to handle.
NOTE Do not disconnect the cables to the antennas and the Amplifier and
Switch. It is recommended to store the CG31 with the cables
connected.
3. Loosen the locking ring on the Helix UHF antenna with the
finger nut and fold the antenna.
4. Loosen the locking ring on the GPS antenna with the finger nut
and fold the antenna.
5. Loosen the locking ring on the tripod with the finger nut.