Vaillant VRT 350, Руководство по эксплуатации, Страница: 12 / 36

4 Operating
12
Operating instructions VRT 350 0020135485_00
4.2.1 Operation in the basic display
From the basic display, you can change the «Desired day
temperature» directly for the current day by turning the
rotary knob.
Desired day temperature
Only today: 18°C
For Permanent Change
Press OK
OK
4.4: Requesting a permanent change of the desired temperature
In the display, a request appears asking if you wish to
change the «Desired day temperature» for the current day
or on a permanent basis.
4.2.1.1 To change the «Desired day temperature»
for the current day only
▶ Turn the rotary knob to set the desired temperature.
◁
The display switches back to the basic display after
12 seconds. The set desired temperature applies only
until the end of the active time period of the current
day.
4.2.1.2 To change the «Desired day temperature»
permanently
1. Turn the rotary knob to set the desired temperature.
2. Press the right-hand selector button, «OK».
◁ The display switches to the basic display. The new
desired day temperature is applied permanently.
4.2.2 Operating example: Changing the date
Auto 01.07.11
°C
19,5
15:34
Desired temperature 20,0°C
Menu Mode
Image 4.5: Basic display
1. If the display does not show the basic display, press the
left-hand selector button, «Back», until the basic display
appears again.
2. Press the left-hand selector button, «Menu».
◁
The controller is now in selection level 1. The left-
hand selector button now has the function «Back»
(to the next selection level up), the right-hand se-
lector button has the function «Select» (the next se-
lection level down).
Menu
Information
Desired temperatures
Time programmes
Back
Select
Image 4.6: Selection level 1: «Information»
3. Turn the rotary knob until the «Basic settings» list
entry is highlighted.
Menu
Time programmes
Time programmes
Days away scheduling
Basic settings
Back Select
Image 4.7: Selection level 1: «Basic settings»
4. Press the right-hand selector button, «Select».
◁
The controller is now in selection level 2.
Basic settings
Language
Date / Time
Display
Back Select
Image 4.8: Selection level 2: «Language»
5. Turn the rotary knob until the «Date/Time» list entry is
highlighted.