Vaillant V 10-025 NHI, Руководство по обучению

Страница: 35 / 56

Split Type Installation Manual
35 EN
PCB Explanation 9
The operation mode may switch between the cooling
and heating according to the indoor temperature under
the automatic mode. If the unit is under the cooling
mode currently, when the temperature is enough for the
compressor to stop, the compressor stops. After 15
minutes the compressor will detect the temperature. If
Tr<Ts-3 ºC�,then the unit will start the heating mode,
otherwise it will remain in the cooling mode. If the unit is
under the heating mode currently, when the temperature
is enough for the compressor to stop, the compressor stops.
After 15 minutes the compressor will detect the tempe-
rature. If Tr>Ts-3 ºC, then the unit will start the cooling
mode, otherwise it will remain in the heating mode.
There is timing function and sleeping function with this
mode. If the unit is under the cooling mode then it will
start the cooling sleep mode. If the unit is under the
heating mode then it will start the heating sleep mode.
The wind panels may sway or stay at a position. The
wind speed could be low, medium, high or automatic.
9.1.4 Special functions
Powerful running
Powerful running for 15 minutes.
The running stops or ends the powerful running after 15
minutes.
The mode switch ends the powerful running.
Enter into the silent mode, normal running mode or
timed switching on mode to end the powerful running.
When in automatic mode, there are powerful and silent
functions for your choice. When the main unit is in
cooling mode, it operates with powerful cooling or silent
cooling. When the main unit is in heating mode, it
operates with powerful heating or silent heating. When
the main unit is in wind-sending mode, there are no
powerful or silent modes.
There is no powerful mode for wind-sending and
moisture removing.
Powerful heating:
Change the set temperature. With temperature adjusting
function.
The wind volume is the automatic medium.
When in frost removing mode, the outdoor unit does not
accept the communication signal for powerful
running.
After 15 minutes of powerful running, the compressor
can not be off within 10 minutes.
Powerful cooling
Change the set temperature. With temperature adjusting
function.
The wind volume is the automatic strong.
After the compressor starts, there will be no low-intense
running protection within 3 minutes.
Silent running
Send the silent running signal to the outdoor unit.
Under the Silent hearing mode,The wind volume is SSLO
after the compressor is on,The wind volume will be kept
SSLO within 20 seconds after the compressor stops and
then changes to weak.
Under the Silent cooling mode the wind volume is
SSLO.
There is no silent mode for moisture removing and wind-
sending.
Air cleaning
If the fan motor starts working after receiving the
remote-control order, the aion generator starts working
and sends out ions.
The ion generator stops as the fan motor stops.
When the ion generator is OFF and the air cleaning
function is on, the fan motor starts running and the ion
generator starts working again.
Timed running
Set the time duration according to the time difference
between the clock for timing and the current clock.
In timing mode, the display panel will flash the light at
fixed times.
Timed OFF
When this function is set, operation
modes on the panel display will not
change. The timing icon will show
and the operation stops when the set
time comes.
Timed ON
When this function is on, the panel
display will only display a question
mark.The unit will operate as the set
mode when the time comes.
Timed ON/OFF
The unit will start operating or stop
according to the order of your setting.