Notes on the documentation 2
0020221297_05 uniSTOR Installation and maintenance instructions
5
2
Notes on the documentation
2.1
Observing other applicable documents
▶
Always observe all the operating and installation instruc-
tions included with the system components.
2.2
Storing documents
▶
Pass these instructions and all other applicable docu-
ments on to the end user.
2.3
Validity of the instructions
These instructions apply only to:
Product article number
VIH GB 120/3 BES
0010019215
VIH GB 150/3 BES
0010019216
VIH GB 180/3 BES
0010019217
VIH GB 200/3 BES
0010019218
VIH GB 250/3 BES
0010019219
VIH GB 300/3 BES
0010019220
2.4
Benchmark
Vaillant is a licensed member of the Benchmark Scheme.
Benchmark places responsibilities on both manufacturers
and installers. The purpose is to ensure that customers are
provided with the correct equipment for their needs, that it is
installed, commissioned and serviced in accordance with the
manufacturer’s instructions by a competent person approved
at the time by the Health and Safety Executive and that it
meets the requirements of the appropriate Building Regu-
lations. The Benchmark Checklist can be used to demon-
strate compliance with Building Regulations and should be
provided to the customer for future reference.
Installers are required to carry out installation, commission-
ing and servicing work in accordance with the Benchmark
Code of Practice which is available from the Heating and
Hotwater Industry Council who manage and promote the
Scheme.
Benchmark is managed and promoted by the Heating and
Hotwater Industry Council.
For more information visit www.centralheating.co.uk
3
Product description
3.1
Serial number
1
You can find the serial number on the data plate
(1)
, which is
located on the cylinder below the electronics box.
3.2
Information on the identification plate
The identification plate is attached to the product at the fact-
ory.
The identification plate keeps record of the country in which
the product is to be installed.
This product meets the requirements of standard EN
12897:2006.
3.3
CE marking
The CE marking shows that the products comply with the
basic requirements of the applicable directives as stated on
the declaration of conformity.
The declaration of conformity can be viewed at the manufac-
turer's site.
