Vaillant myVAILLANT connect, Инструкции по установке

Страница: 15 / 52

0020328020_00 Installation instructions
15
This offer applies for three years from the
date of purchase, or at least for the time
in which we offer support for the Wi-Fi
gateway.
5 Repair
5.1 Replacing the connection cable
▶
If you replace the connection cable,
only use an original connection cable
from the manufacturer (article number
0020299966 or 0020299967).
5.2 Replacing the power supply
unit
▶
If you replace the power supply unit,
only use the original power supply unit
from the manufacturer (article number
0020292010 or 0020292011).
6 Decommissioning
1. Deactivate the product in the myVAIL-
LANT app.
2. Reset the product to its factory set-
tings by pressing and holding the but-
ton next to the LED for at least 10
seconds.
◁
The LED goes out as soon as the
resetting process starts.
◁
Your information and settings are
deleted.
◁
The connection to the coupled ra-
dio room thermostat is deleted.
3. Decommission the product.
7 Customer service
The contact details for our customer ser-
vice are provided on the back page, in the
appendix or on our website.
No software is perfect and, for that reason,
we are always working on additional im-
provements for you. If you find indications
of a weak spot or of a safety issue, please
notify us by sending a message to:
secure@myvaillant.com
8 Technical data
Technical data
–
Wi-Fi gateway
Rated voltage 5 to 24 V
Requirement for the
power supply * ES1 or PS1 in
accordance with
IEC 62368-1
Radio frequency bands
868.0
–
868.6 MHz,
869.4
–
869.65 MHz
WLAN radio frequency
band
2.4 GHz
Radio frequency out-
put at 868.0
–
868.6 MHz
(max. e.r.p.)
6.6 dBm
Radio frequency output
at 869.4
–
869.65 MHz
(max. e.r.p.)
6.9 dBm
WLAN radio frequency
output (max. e.r.p.) 17.5 dBm
WLAN channels 1
–
13
WLAN encryption WPA2-PSK,
WPA3 personal
IP assignment DHCP
Maximum environ-
mental temperature 50
℃
Extra low-voltage wire
(bus line)
–
cross-sec-
tion
≥
0.75 mm
²
Height 96 mm
Width 122 mm
Depth 36 mm
IP rating
IP 21
Protection class III
Permitted degree of
environmental pollution 2
Note
* Applies for use with the connec-
tion cable for the direct connection
to the heat generator.
Technical data
–
Plug-in power sup-
ply unit
Rated voltage 120 … 230 V
AC
Rated current 0.3 A