background image

Operating instructions geoTHERM 0020051578_03

5

a

Safety information

a

GB

2

2 Safety 

information

2.1 

Safety and warning information

 

>

When operating the geoTHERM heat pump, observe the 
basic safety and warning information that may appear 
before an action.

2.1.1  

Classification of warnings

The warning notes are classified in accordance with the 
severity of the possible danger using the following danger 
signs and signal words:

Danger sign

Signal 
word

Explanation

a

Danger!

Immediate danger to life or 
risk of severe personal 
injury

e

Danger!

Danger of death from elec-
tric shock

a

Warning!

Danger of minor personal 
injury

b

Caution!

Risk of material or environ-
mental damage

2.1  Meaning of danger signs and signal words

2.1.2  Structure of warnings

Warning signs are identified by an upper and lower separat-
ing line and are laid out according to the following basic 
principle: 

a

 Signal 

word!

Type and source of danger!

Explanation of the type and source of dan-
ger.

 

>

Measures for averting the danger.

2.2 Intended 

use

Vaillant geoTHERM heat pumps are state-of-the-art appli-
ances which are designed in accordance with recognised 
safety regulations. Nevertheless, there is a risk of death or 
serious injury to the operator or others or of damage to the 
units and other property in the event of improper use or 
use for which they are not intended.
The heat pump is not designed to be used by persons 
(including children) with limited mental and sensory capa-
bilities or by persons who have insufficient experience and/
or knowledge, unless they are supervised by a person who 
is responsible for their safety or have been instructed by 
him/her about how to use the unit.
Children must be supervised to ensure that they do not 
play with the unit.
Vaillant geoTHERM heat pumps are intended exclusively for 
domestic use. 
The units are intended for use as heating appliances for 
closed wall and underfloor heating systems, for optional 
external passive cooling and for DHW loading. 
Any other use, or use beyond that specified, shall be con-
sidered improper use. Any direct commercial or industrial 
use is also deemed as improper. The manufacturer/supplier 
is not liable for any damage resulting from improper use. 
The user alone bears the risk.
Intended use includes the following:

 

– observance of accompanying operating, installation and 

maintenance instructions for Vaillant products as well as 
for other parts and components of the system

 

– installing and fitting the boiler in accordance with the 

boiler and system approval

 

– compliance with all inspection and maintenance condi-

tions listed in the instructions.

Improper use of any kind is prohibited!

2.3 

Basic safety instructions

Observe the following safety instructions and regulations 
when operating the geoTHERM heat pump:

 

>

Take advantage of the extensive instruction in the opera-
tion of the heat pump provided by your skilled trade 
company.

 

>

Carefully read through these operating instructions.

 

>

Only carry out activities that are described in these 
operating instructions.

Safe operation of the heat pump

Installation, inspection/maintenance and repair of the heat 
pump may only be carried out by a qualified heating engi-
neer. The existing regulations, rules and guidelines must be 
observed when doing so.
In particular, work on the electrical components and on the 
coolant circuit requires an appropriate qualification. 
With the exception of maintenance work, the heat pump 
must be operated with the cover closed.

Содержание geoTHERM SERIES

















































































































Отзывы: