11
Split Type User Manual
EN
7.5.3 Dehumidifying Mode (DRY)
In dehumidifying mode (DRY), the air conditioning unit
operates by removing the humidity from the
atmosphere.
Fig. 7.8 Dehumidifying mode selection.
Legend
1 MODE button
2 DRY mode indicator
3 TEMP button (increase/decrease)
4 FAN button
In order to activate:
With the unit connected (see section 7.4):
• Press the MODE button.
The different operation modes are displayed.
AUTO
COOL
DRY
FAN
HEAT
Fig. 7.9 Operation modes.
• Select the dehumidifying mode (DRY).
• Press the TEMP buttons to select the temperature
setting.
When pressing the TEMP buttons, the temperature
configuration will increase or decrease by 1ºC.
When keeping the TEMP buttons pressed, the
temperature configuration will increase or decrease
quickly.
• Press the FAN button to select the fan speed.
Each time the FAN button is pressed, the fan speed
will be modified as shown in Figure 7.10.
Fig. 7.10 Fan speed.
The operation in cooling mode is started when the
ambient temperature is greater than the configured one.
In dehumidifying mode and, when the ambient
temperature exceeds the configured one by 2ºC, the unit
will operate intermittently at LOW speed regardless of
the fan configuration, see Figure 7.11.
Fig. 7.11 Dehumidifying mode working diagram.
Legend
T1 Configured temperature
Note!
In dehumidifying mode, prolonged use of the unit
under conditions of considerable air humidity can
cause drops of water to fall on the outlet grate.
Operating Instructions 7