Vaillant aroTHERM VWL ../2 A 230 V series, Руководство по установке

Страница: 28 / 44

9 Decommissioning
28
Installation instructions aroTHERM 0020147164_07
8.3 Carrying out the actuator test
Menu
→
Installer level
→
Test menu
→
Sensor/actuator
test
You can check that the components of the heating installa-
tion are functioning correctly using the sensor/actuator test.
Display Test programme
T.0.01 Building circuit pump power
T.0.05 Fan power
T.0.07 4-way valve (circuits for thawing are not counted)
T.0.08 Position of the electronic expansion valve
T.0.09 Heating coil compressor
T.0.13 Flow temperature
T.0.14 Return temperature
T.0.16 Building circuit flow rate
T.0.17 Lockout contact S20
T.0.26 Compressor outlet temperature
T.0.27 Compressor inlet temperature
T.0.28 Electrical expansion valve
–
ambient temperature
T.0.29 Electronic expansion valve
–
building circuit
temperature
T.0.30 High pressure
T.0.31 Condensation temperature
T.0.33 Evaporation temperature
T.0.34 Superheating target value
T.0.35 Superheating actual value
T.0.36 Subcooling actual value
T.0.66 Air inlet temperature
T.0.67 High-pressure switch
T.0.68 Compressor rotational speed
T.0.69 Condensate pan heating
T.1.37 Outside temperature
T.1.38 DCF status
T.1.59 Multi-function output 1
T.1.60 Multi-function output 2
T.1.61 Diverter valve 1
T.1.62 Flow sensor
T.1.63 Cylinder sensor
T.1.64 Multi-function input
T.1.65 Energy supply company input
8.4 Carrying out check programmes
Menu
→
Installer level
→
Test programs
→
Check pro-
grams
You can use the check programmes to purge the circuits,
carry out manual de-icing and check the product's primary
function.
Display Check programme
P01 Forced heating
P02 Forced cooling
P06 Manual de-icing
Display Check programme
P10 Purging the heating circuit
P11 Purging the hot water circuit
9 Decommissioning
9.1 Temporary decommissioning
1. Switch off the product.
2. Disconnect the product from the power supply.
9.2 Permanently decommissioning
1. Switch off the product.
2. Disconnect the product from the power supply.
3. Drain the product. (
→
Page 27)
4. Dispose of or recycle the product and its components.
10 Vaillant customer service
10.1 Customer service
To ensure regular servicing, it is strongly recommended
that arrangements are made for a Maintenance Agreement.
Please contact Vaillant Service Solutions for further details:
Telephone: 0330 100 3461
11 Disposal
11.1 Recycling and disposal
▶
The competent person who installed your product is re-
sponsible for the disposal of the packaging.
If the product is identified with this symbol:
▶
In this case, do not dispose of the product with the
household waste.
▶
Instead, hand in the product to a collection centre for old
electrical or electronic appliances.
If the product contains batteries that are marked with
this symbol, these batteries may contain substances that are
hazardous to human health and the environment.
▶
In this case, dispose of the batteries at a collection point
for batteries.