0020323586_00 Installation and maintenance instructions
37
2
Notes on the documentation
2.1
Observing other applicable documents
▶
Always observe all the operating and installation instruc-
tions included with the system components.
2.2
Storing documents
▶
Pass these instructions and all other applicable docu-
ments on to the end user.
2.3
Validity of the instructions
These instructions apply only to:
Product
–
Article numbers
VED E 11-13/1 L U
0010044426
3
Product description
1
2
4
5
7
8
3
6
1
Front cover
2
Printed circuit board
3
Domestic hot water
connection
4
Power supply cable
5
Cold water connection
6
Option II
–
routing the
power supply cable
7
Overheating protection
8
Temperature selector
(rotary knob)
3.1
Information on the data plate
The data plate is located on the side of the product
Information on the data
plate
Meaning
Serial-No.
Serial number
electronicVED lite
Type designation
U
Installation below the work
surface
/1
Product generation
11-13 kW
Rated power
3/PE 400V ~ 50/60 Hz
Electrical connection data
IP24
IP rating
Information on the data
plate
Meaning
1 MPa (10bar)
Rated excess pressure
ρ
15>900
Ω
•cm
Min. specific resistance of the
water
max.70 °C
Max. permissible inlet temper-
ature
VDE/EMC mark
Do not dispose of the product
in the household waste.
Read all of the instructions.
Barcode with serial number,
The 7th to 16th digits of the
serial number form the article
number
3.2
CE marking
The CE marking shows that the products comply with the
basic requirements of the applicable directives as stated on
the declaration of conformity.
The declaration of conformity can be viewed at the manufac-
turer's site.
4
Set-up
Caution.
Risk of material damage caused by inad-
equate fastening
If the product is inadequately secured to the
wall, the product or connected products may
be damaged.
▶
Secure the unit's rear panel using the
enclosed screws and wall plugs.
▶
Secure the front section of the unit to the
rear section of the unit.
▶
Before using the unit, ensure that it has
been installed correctly.
4.1
Checking the scope of delivery
1.
Remove the product from its box.
2.
Remove the protective film from all parts of the
product.
3.
Check that the scope of delivery is complete and intact.
4.1.1
Scope of delivery
Number
Designation
1
Electric instantaneous water heater
1
Remote control (VED E 11-13/1 L F only)
1
Enclosed documentation
Содержание 0010044426
Страница 167: ......